What Oil Filter Fits on the Derale Thermostatic Engine Oil Filter Adapter and a Kawasaki 4 Wheeler
Question:
I have a Kawasaki Brute Force 4 wheeler, I want to install an oil cooler and the filter threads are 20mm x 1.5 oil filter but the OEM filter gasket is too small for the sandwich adapter. What size automotive filter will fit on this adapter. What other parts do you suggest to complete my project.
asked by: Sam
Expert Reply:
After doing a bit of research on the internet, I was able to find that the Fram filter, PH3950, will work on the 20 x 1.5 mm threaded adapter included with the thermostatic adapter, part # D25732. This filter has a 2.80 inch outside diameter gasket that will work with the thermostatic adapters.
This filter has a larger overall outside diameter, 3.66 inches, than your 4 wheeler OEM filter too and you will need to check to be sure that the Oil filter will fit in the location with the sandwich adapter installed.
If the PH3950 Oil Filter will not fit you will need to go with the Derale Low-Profile Sandwich Adapter, # D25772, which will work with the smaller 2-5/8 inch gasket diameter of your 4 wheelers OEM oil filter. This filter does not have the thermostat installed so your OEM filter will seal on it. I added a photo showing the # D25732 adapter and the # D25772 adapter and the difference that keeps your OEM filter from sealing on the thermostatic model.
Products Referenced in This Question
Derale Low-Profile Sandwich Adapter - 20 mm x 1.5 mm Engine Filter Threads
- Accessories and Parts
- Engine Oil Coolers
- Oil Line Adapters
- Sandwich Adapter
- Single Thread
- Derale
more information >
Product Page this Question was Asked From
Derale Thermostatic Sandwich Adapter - 20 mm x 1.5 mm Engine Filter Threads
- Accessories and Parts
- Engine Oil Coolers
- Oil Line Adapters
- Sandwich Adapter
- Single Thread
- Derale
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Derale Low-Profile Sandwich Adapter - 20 mm x 1.5 mm Engine Filter Threads
- Shop: Derale Thermostatic Sandwich Adapter - 20 mm x 1.5 mm Engine Filter Threads
- Video: Derale Engine Oil Coolers D25772 Review
- Shop: Transmission Cooler
- Shop: Derale Stacked-Plate Engine Oil Cooler Kit w/ Sandwich Adapter (Multiple Threads) - Class III
- Shop: Bulldog Winch Booster Cable Set w/ Power Leads - Quick Connect to Clamp - 2 Gauge - 20' Long
- Search Results: blind spot mirror
- Search Results: rub rail
- Search Results: oil cooler
- Shop: Derale Stacked-Plate Engine Oil Cooler Kit w/ Non-Thermostatic Sandwich Adapter - Class III
- Search Results: trailer light bracket
- Search Results: winch power cable
- Search Results: oval light box
- Shop: Buyers Products Tail Light Mounting Box - 6" Oval Hole - Black Powder Coated Steel
- Shop: Buyers Products Tail Light Mounting Box - 6" Oval Hole - 2" Round Hole - Black Steel
- Article: Trailer Wiring Diagrams
- Video: Deka Jacketed 4-Wire Installation
- Search Results: weld on spare tire carrier
- Q&A: Recommended Battery Size for 13,000 Pound Electric Winch
- Q&A: Recommended Oil Cooler for a 2005 Chevy Trailblazer 4.2 Liter I-6 Engine
- Q&A: Do Any Factory OEM Components Need to be Replaced to Install Engine Oil Cooler # D15602
- Q&A: Derale Engine Oil Cooler for 2012 Toyota FJ Cruiser 4x4
- Q&A: What Is the Difference Between the Derale Stacked-Plate Engine Oil Cooler Kit D15602 and D15605
- Q&A: Is Vehicle Engine Oil Being 225 Degrees Safe
- Q&A: Can D-Ring of Buyers Products 1" Forged 360 D-Ring # 337B51 Still Move if Welded
- Video: Bulldog Ratcheting Vehicle Tie-Down Strap Set Review
- Video: Bulldog Winch Ratcheting Tie Down Straps Set Review
- Video: Bulldog Axle and Ratcheting Tie Down Straps with Bag Review