Rebuild Kit for a Roadmaster Falcon Tow Bar 5250

Question

Question:

I need # 910003-52 kit.

asked by: Herbert M

0

Expert Reply:

The rebuild kit for the Roadmaster Falcon Tow Bar 5250 is # RM910003-52. I have included a link to the installation details for you.

expert reply by: Michael H

0

Answer 1

I reached out to my contact at Demco and he confirmed that the Demco Excali-bar will work with the Roadmaster #RM-035 Adapters for your Jeep. However, the Roadmaster D-ring Adapters are not confimed to fit a Rugged Ridge XHD bumper, so if that is the…

view full answer...

Answer 2

Over time the AutowLock buttons of the Roadmaster Falcon 2 Tow Bar #RM-520 can wear out and need to be replaced. The good news is that we carry a repair kit for this to get it back to normal. For that you would need the part #RM-910003-60.

view full answer...

Answer 3

Your memory does serve you right and both arms on your Roadmaster Falcon 2 #RM-520 are designed to "lock up" as this is not a non-binding tow bar; whether or not they've been able to get the arms to lock without performing the two sharp…

view full answer...

Answer 4

You're correct that the Roadmaster Invisibrake #RM-8700 is not a true proportional supplemental braking system; it's considered a "progressive" system, meaning that when braking is called for, InvisiBrake immediately engages the…

view full answer...

Answer 5

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 6

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 9

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 10

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 11

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 12

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Rebuild Kit for a Roadmaster Falcon Tow Bar 5250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching