Troubleshooting Sparks on Safety Chains When Connecting to Hitch
Question:
I install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector on my 2019 infiniti QX60 per instruction. no issues with the installation. But when I hook up the travel trailer, there are visible sparks between the trailer safety chain hooks and Hitch Receiver. I was told there might be issues with the grounding. Please advise if there are ways I can check what is going on and how to fix the problem. Thanks.
asked by: Alex C
Expert Reply:
What you've been told is likely the culprit, and I don't believe that it's coming from an issue on the Curt # C56357 you've installed. I would check the ground wire on the trailer wiring harness to make sure that it is connected to a paint, rust and debris free spot on the trailer frame. This is the most likely cause of the sparks that you're seeing. If you can check this and see if it continues, that's a good place to start. If you're still experiencing the same issue after cleaning off and re-attching the trailer ground wire, let me know and I can give you a few other things to check out.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Custom Fit
- 7 Round - Blade
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Ultra-Fab Ultra Scissor Jacks - 24" Lift - 13,000 lbs - Qty 2
- Search Results: stabilizer jack
- Shop: Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Shop: Vehicle Tow Bar Wiring
- Q&A: Plugged Trailer In, there Was a Spark, Now Trailer Lights Will Not Work
- Q&A: What Would Cause Sparks When Trailer Safety Chains are Connected
- Q&A: Installation of 4-Way and 7-Way Trailer Wiring Harness on a H3 Hummer
- Q&A: 7-Way RV Trailer Connector Wiring Diagram
- Shop: Brake Controller
- Shop: Curt RV Bumper 2" Trailer Hitch Receiver
- Q&A: What Causes Light Activation Delay on RV
- Q&A: Replacement 5 Leaf Slipper Spring for a Tandem Axle Dump Trailer with Two 6K Axles
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: etrailer Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 5,200 lbs to 7,000 lbs
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 44649
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Wiring
- Search Results: 68149
- Article: Trailer Wiring Diagrams
- Video: Curt Spectrum Trailer Brake Controller Review
- Q&A: Hanger Spacing Dimensions for Installing Double-Eye Leaf Springs on a Trailer
- Search Results: 25580
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Fifth Wheel Hitch
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: dust cap
- Article: How to Install E-Track in 3 Easy Steps
- Video: Blue Ox Base Plate Kit Installation - 2021 Jeep Wrangler Unlimited