Possible Replacement Trailer Taillight Strip for 2008 Sylvansport Go

Question

Question:

Is this the OEM part for the 2008 Sylvansport Go trailer? The lens has “Hotline Rev. 1” printed on the bottom of the lens. Thank you.

asked by: Peter G

0

Expert Reply:

Thanks for the picture of what's on your trailer. It certainly looks like the part # STL87RCB that you referenced but might be from a different manufacturer. That said if the distance between the mounting holes on what you have is 14-1/2 inches this would bolt right up and work well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The only difference between the Optronics ThinLine LED Trailer Tail Light part #STL87RCB and part #STL87RCPG is that the latter has bullet style (removable) connectors and the former has bare wire ends.

view full answer...

Answer 2

Considering the limited space that you have in your truck camper the Thinline Opti-Brite LED Interior Strip Light - 21-7/8" Long x 1" Wide x 5/8" Thick Item #ILL72CB is a great choice. I linked a video review of this light for you.…

view full answer...

Answer 3

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 4

From the center of the holes on the vertical adjustment bracket of the Demco part #DM13867-52 to the end of the channel on opposite end measures 11-1/2 inches.

view full answer...

Answer 5

The Dexter Electric Trailer Brake Kit #23-105-106 are a replacement set for the 023-358-00. This kit includes a right and left brake assembly that is manually adjustable. I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit #23-458-459 as…

view full answer...

Answer 6

We do have what you need to replace the UFP HD-1377-10 hub and drum as well as add hydraulic brakes for your boat trailer. Here are the exact parts you will need: - Dexter Trailer Hub and Drum Assembly #84546UC3 - Hydraulic Trailer Brake Kit -…

view full answer...

Answer 7

The #99 trailer spindle is typically found on 9,000 lb and 10,000 lb axles. This is not a spindle that we carry at this time, but I did find some of the measurements. I have attached a diagram showing the dimensions of a #99 spindle for you to check…

view full answer...

Answer 8

The backspacing of the HWT Hi-Spec wheel part #AM20305 is 3-1/4 inch and the #AM97XR 3-1/2 inch.

view full answer...

Answer 9

To find the correct replacement wheels you'll need to know the diameter, width, and bolt pattern. Since we know the diameter is 15" we can move to determining the width. Typically this is printed/stamped to the backside of the wheel behind…

view full answer...

Possible Replacement Trailer Taillight Strip for 2008 Sylvansport Go

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching