Replacement Hinge Insert Support for Rhino-Rack Batwing Awning

Question

Question:

Will this work with rino rack batwing awning?

asked by: Penny M

0

Expert Reply:

The Replacement Support Hole Hinge for Rhino-Rack Sunseeker Awning - Qty 1 # RRC882 is not compatible with the Batwing Awning. Instead you will want the Replacement Hinge Insert Kit for Rhino-Rack Batwing and Foxwing Awnings - Qty 2 # RRCA1175. I've attached a video of this repair to assist.

expert reply by: Jason S

0

Answer 1

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 2

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 3

Though I can confirm that InTech does use Dexter torsion axles, I was unable to find exactly which one and what angle is used on your 2020 Sol Dawn. So with that being said, what you will need to do is contact InTech with your VIN and they should be…

view full answer...

Answer 4

If you are looking for the tapered extension for the larger size of Rhino-Rack Batwing Awning - 118 sq. foot #RR33100 or #RR33200, the correct part you need is the Tapered Extension with Door for Rhino-Rack Batwing Awning #RR59RW. If you happen to…

view full answer...

Answer 5

There are two different 7-way trailer wiring harnesses for a 2019 Subaru Ascent dependent on whether or not you have the factory tow package. If you do have the factory tow package then you should be using the Tekonsha OEM Replacement Vehicle Wiring…

view full answer...

Answer 6

I did some checking online and found that Intech actually offers an off-road package for the Chase Flyer that uses the Timbren Axle Less kit, so while we haven't had the chance to do it we know it is possible. We also know these can be used on…

view full answer...

Answer 7

We carry the Replacement Support Arm Assembly #RR33BY which is also referred to as a spar pole. This is only available as an assembly and not separately for only the poles. This fits both the Rhino-Rack Batwing Awning #RR33100 and #RR33200

view full answer...

Answer 8

In regards to replacing electric trailer brake assemblies, it is best to do so in pairs that way you have even pad wear on each side. In many cases, they are only sold as a pair. The correct replacement for 023-469-00 is the Dexter Nev-R-Adjust…

view full answer...

Answer 9

view full answer...

Replacement Hinge Insert Support for Rhino-Rack Batwing Awning

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching