Easiest to Install Trailer Idler Hub for 3,500 Lb Axle
Question:
Hello, I have a utility trailer Holmes 5x8 with mesh sides that appears to be 5 on 4.5inch w/ 15inch tires ... and 3.5k ez lube. What are the best hubs to get? The easier the better pre greased etc. Thanks!
asked by: Ashley M
Helpful Expert Reply:
The Trailer Idler Hub Assembly part # AKIHUB-545-35-EZ-K is the most convenient option we offer for a 3,500 lb axle as it is already pre-greased and the bearing and grease seal are already set into place for you. Therefore, all you need to do is first remove the old hub, slide the new one on, tighten down the castle nut and you are good to go.
Product Page this Question was Asked From
Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Loadstar ST205/75D15 Bias Trailer Tire w/ 15" Black Mod Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Correct Hubs for Boat Trailer with L68149 and L44649 Bearings
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-EZ-K Review
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: CargoSmart D-Ring Tie-Down Anchor - Bolt On - 1/4" x 1-9/16" - 800 lbs
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Shop: Lionshead Trailer Wheel Center Cap w/ Snap-In Plug - 3.19" Pilot - Stainless Steel
- Q&A: Recommended Spare Hub for TDE 3,750 Lb Axle
- Video: Review of etrailer Trailer Hubs and Drums - Hub - AKIHUB-655-35-K
- Q&A: Replacement Trailer Bearings for Shoreland’r Trailer with #84 Spindle
- Q&A: How to Find Correct Replacement Hubs for Shorelandr Boat Trailer
- Video: Review of CE Smith Trailer Hubs and Drums - Idler Hub - CE13515
- Q&A: Is There a 5-Lug Idler Hub for Trailer with Two L44649 Bearings
- Q&A: Trailer Hubs Based on Spindle Measurements 3,500 Pound Axles
- Q&A: How to Pick Out New Hub for Trailer With Bearing Numbers that Aren't Marked
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU84FR
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Shop: RV Exterior Lighting
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-G-EZ-K Review
- Search Results: high temp bearing grease
- Search Results: bearing grease
- Search Results: 5 on 4.75
- Search Results: bearing buddy
- Search Results: grease gun