Replacement Trailer Vent Cover Lid for Wells Cargo Road Force Cargo Trailer

Question

Question:

Hello, I have a Wells Cargo 7x16 Road Force cargo trailer. A large branch came down last night and crushed my vent cover. The best I could measure was between 14 1/4 square or 14 1/2 square. Didnt know where to measure from.. Im not sure what to order from you folks. Ill try and attach some pictures of the vent itself. Thank you

asked by: Dustin S

0

Expert Reply:

Thanks for the pictures of your vent assembly! Based on them I was able to determine that the correct replacement lid you need is the part # BBC0530-01.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I've attached one of our installation videos that covers the process, but it's extremely simple. All you'll do is untwist a tab on each side of the old hinge to allow it to slide off; then slide the new Ventline Cover…

view full answer...

Answer 2

In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14". To pick the correct cover,…

view full answer...

Answer 3

It looks like you have a standard 14-1/4 by 14-1/4 trailer roof vent but you would want to measure to be sure. The second step is to look at the hinge portion of your cover. It looks like you may have a metal continuous hinge but I have added…

view full answer...

Answer 4

We have a metal lid that will fit as a replacement for what you have with the part #BV0534-00. This would be the most durable option that would hold up much better than plastic.

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

To see all of the correct wheel and tire combos you'd need check out the link I attached. The option I would recommend is the part #TA43RR which is a Load Range C tire size ST175/80R13 mounted on a white spoke wheel with a bolt pattern of 5 on…

view full answer...

Replacement Trailer Vent Cover Lid for Wells Cargo Road Force Cargo Trailer

Product Page this Question was Asked From

Continue Researching