What is Thickness of LaSalle Bristol XTRM Roof Membrane part # 3441700534142711440

Question

Question:

What is the material thickness 40?, 60? Mil for this product?

asked by: Rideout

0

Expert Reply:

The LaSalle Bristol XTRM roof membrane part # 3441700534142711440 is 27 MIL which makes it about 0.68 mm thick.

expert reply by: Jameson C

0

Answer 1

We have the kit part #3442703414KIT which comes with everything needed to install roof membrane like the #3441700534142711435. The kit includes a 2-gallon container of EXP90 adhesive, six 10-oz cartridges (300 linear feet) of XTRM 100 self-leveling…

view full answer...

Answer 2

Great question! The 2 gallon container of EXP90 adhesive included with the LaSalle Bristol XTRM Roof Install Kit #3442703414KIT will cover about 400 square feet (200 square feet per gallon).

view full answer...

Answer 3

We do have the LaSalle Bristol XTRM Roof Installation Kit #3442703414KIT that is used to install the LaSalle Bristol XTRM Roof Membrane #3441700534142711440 that you referenced. I'd check with local RV dealers to you to see if any can install…

view full answer...

Answer 4

There is a roof membrane kit available for roof membranes like part #3441700534142711435. You would need to purchase the LaSalle Bristol XTRM RV Roof Installation Kit part #3442703414KIT to install the roof membrane.

view full answer...

Answer 5

The Alpha Systems Superflex TPO RV Roof Membrane #AL42CV has a thickness of 30 mil or .03".

view full answer...

Answer 6

The Alpha Systems Superflex RV Roof Membranes like part #AL42CV uses a TPO membrane and the LaSalle Bristol RV Roof Membranes like part #3441700534142711435 uses a PVC membrane. The TPO membrane is more resistant to punctures and wear but the PVC…

view full answer...

Answer 7

The Andersen Rapid Jack #AM3620 is not designed to work with triple axle trailers. If you are looking to use it for leveling, then I recommend the Andersen Camper Wheel Chock and Leveler #AM3604 for your application. The similar #EZ-JACK is also not…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 12

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

What is Thickness of LaSalle Bristol XTRM Roof Membrane part # 3441700534142711440

Product Page this Question was Asked From

Continue Researching