Does Trailer Hitch Receiver for 2020 Tesla Model X Have Restriction on Rise or Drop

Question

Question:

Does this unit have a restriction on the ball mount rise/? To be specific, would a 12” rise be safe to use with this hitch receiver. Thanks!

asked by: Gary

0

Expert Reply:

There is not a restriction associated with a ball mount's rise or drop for the Draw-Tite Trailer Hitch Receiver # 76143 that fits your 2020 Tesla Model X.

For a ball mount the one with the most rise we offer is the Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop # AMSC12.

For 1-7/8" or 2" hitch balls with this mount you'll need the Convert-A-Ball Interchangeable Ball Set # 901b; for a 2-5/16" hitch ball you'll need part # C40007. And for a hitch lock to secure the mount to your hitch you'll need the etrailer Trailer Hitch Receiver Lock # e98880.

Additionally, for a 4-way wiring harness to power your trailer's lights the harness that fits your Tesla is the ZCI Circuit Protected Vehicle Wiring Harness # 119250KIT.

I've added links to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

When a hitch notes that it is not rated for Weight Distribution it means that it cannot be used with any type of WD setup on your trailer. We currently do not have a hitch available that will fit on the 2017 Tesla Model X that allows for use with…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 10

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Does Trailer Hitch Receiver for 2020 Tesla Model X Have Restriction on Rise or Drop

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching