Correct Brakes for the Timbren 3,500 Lb Heavy-Duty Axle-Less Trailer Suspension
Question:
Hello I am looking at purchasing the ASR35HDS05 for a trailer i plan on building. I am trying to trck down the part number for the electrical brake hub for this particualt spindle. I was told the bolt pattern is a 6 x 5 1/2 x 1/2. Can you help me track down the left and right side parts number thanks.
asked by: Anthony W
Expert Reply:
In order to add brakes and hubs/drums to the Timbren Heavy-Duty Axle-Less Trailer Suspension part # ASR35HDS05 you'll need to use the Electric Trailer Brake Kit part # AKEBRK-7-SA and the Trailer Hub and Drum Assembly part # AKHD-655-6-EZ-K which has a 6 on 5-1/2" bolt pattern.
Products Referenced in This Question
etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12 x 2 Inch Drum
- 5200 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- etrailer
more information >
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Heavy Duty - 4" Lift - 5 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Adding Crossbars To A Teardrop Trailer
- Article: Trailer Tire Sizing
- Q&A: Tip for Where to Mount Derale Remote Transmission Cooler 2004 Ford Explorer
- Q&A: Timbren Axle Less kit for 4,000 lb Trailer that has 4 inch Lift
- Q&A: What Wheel And Tire Clearances Are Needed For A Trailer Build
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Article: Trailer Lighting Requirements
- Article: How to Raise Your Travel Trailer Height
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Where to Position the Trailer Axle?