Redarc BCDC Battery Charger Compatibility for 2019 F-350 Chassis Class C

Question

Question:

Thanks I think I will need a longer cable than 10', which 16-20' item number do I choose

asked by: Ottis W

0

Expert Reply:

The Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 40 Amp # 331-BCDC1240D will work well on a Class C vehicle. The unit will charge your secondary battery and allow you to use solar panels for charging as well. It works on a wide variety of battery styles and the installation instructions will help you with installation. I do recommend using the 60-Amp MIDI Fuse Kit for Redarc In-Vehicle 40-Amp BCDC Battery Charger # 331-FK60. Redarc does recommend using 6 gauge wire like for runs up to 16 feet and 4 gauge if the run is longer. I recommend using the Bulldog # BDW20307 for this wiring.

expert reply by: Jason S

0

Ottis

7/22/2020

Can this unit be used with a Class C vehicle? 2019 Ford F-350

Reply

Jason S.

7/22/2020

The Go Power Portable Solar System with Digital Solar Controller - 200 Watt Solar Panel # 34282610 you referenced can be used instead of the BCDC charger or combined with the BCDC charger. It will mount to your vehicle roof if you so desire. My recommendation for that application is the Go Power Overlander Solar Charging System with Digital Solar Controller - 190 Watt Solar Panel # 34282181 which is designed specifically for that function versus the portable function of the panel you asked from. This will have wire and connectors designed for that use as well as mounting brackets specifically designed for that panel and

Reply

Ottis

7/22/2020

Thanks I think I will need a longer cable than 10', which 16-20' item number do I choose

Reply

Jason S.

7/22/2020

For 24 feet long, you can use Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 3 Gauge - 24' Long # BDW20026 For 20 feet, you can cut down the 24 foot option or use the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 20' Long # BDW20206. For 16 feet use the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 3 Gauge - 16' Long # BDW20043.

Reply

Answer 1

Since you have a 400ah lithium battery bank the best option is going to be the Redarc In-Vehicle BCDC Battery Charger #331-BCDC1240D. This DC to DC charger works with 12V or 24V vehicle systems with standard or smart alternators and is compatible…

view full answer...

Answer 2

The 60-Amp Relay Kit for Redarc In-Vehicle BCDC Battery Charger #331-RK1260 does not eliminate the need for the blue wire ignition feed on a truck with a smart alternator, which your 2018 Chevy Colorado does have, according to my research (to know…

view full answer...

Answer 3

Redarc recommends using a 6-gauge wire for runs up to 16' and 4-gauge for runs longer runs for the 60-Amp MIDI Fuse Kit for Redarc In-Vehicle 40-Amp BCDC Battery Charger, part #331-FK60. I have included a video review link below.

view full answer...

Answer 4

Yes, the 2 gauge wires in the Bulldog Winch Rear Wiring Kit - Quick Connect to Terminal End - 2 Gauge - 20' Long #BDW20206 are 2 AWG (American wire gauge). I have added links to a video review as well as a link to a video of an installation for…

view full answer...

Answer 5

The way you currently have the system set up will work just fine for you. However, if you want to use the 12-volt accessory feed from your 7-way to maintain (not charge) the trailer mounted winch battery, the battery would indeed need to be grounded…

view full answer...

Answer 6

You'd need #331-FK60 60A MIDI fuses at the positive connections to the start and auxiliary battery as mentioned on page 10 of the instructions for the Redarc #331-BCDC1250D DC to DC battery charger (see provided link). The fuses are included with…

view full answer...

Answer 7

The 60-Amp MIDI Fuse Kit for Redarc In-Vehicle 40-Amp BCDC Battery Charger #331-FK60 is not waterproof and is not meant to be installed outside in the elements. Most of the time when you install fuses and breakers and what not you're going to…

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 11

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 12

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Redarc BCDC Battery Charger Compatibility for 2019 F-350 Chassis Class C

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching