Replacement Range Fan Motor for Ventline Range Hoods

Question

Question:

Looking for this motor, no markings on motor but is 1 1/2inch motor only.

asked by: Ed R

0

Expert Reply:

It looks like you might be looking for the Replacement 12-Volt DC Fan Motor for Ventline RV Range Hood # BVD0218-00, which is designed for Ventline P, S0721, B, and T Series range hoods. If you can let me know what this motor is on, I can help you narrow down the possibilities.

I've also linked our entire selection of range hood motors for you to have a look at.

expert reply by: Erik B

0

click to enlarge

Answer 1

We have a couple of 6 inch fan blades that may work for your application, but none of them have the D shaft. Depending on the diameter of that shaft, these may still work. The Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents…

view full answer...

Answer 2

Below is the general process for bleeding an electric over hydraulic brake actuator like #K71-650. Fill reservoir with NEW brake fluid. Never re-use brake fluid that has been salvaged or removed from another system. Remove the key from the breakaway…

view full answer...

Answer 3

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 4

The motor you'd looked at, part #BVD0218-00 is the correct replacement for your range hood. I've confirmed this by forwarding your photo to the folks at Ventline.

view full answer...

Answer 5

I checked with my contact at Ventline and for your PR-8 100-CFM range hood the correct replacement motor is the part #BVD0278-00. Then for the fan blade you will need part #BCD0409-00.

view full answer...

Answer 6

We do offer a replacement AC shroud for your Coleman Mach unit. MaxxAir offers the #MA8335A5261 replacement shroud for Coleman-Mach/RVP AC units that will work perfectly for you, per my contact at MaxxAir. I've linked to a product description…

view full answer...

Answer 7

The Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 will definitely be the direct replacement for the Ventline PR-4 you are fixing, but the motor housing is not available separately, unfortunately. Below I have all the replacements parts…

view full answer...

Answer 8

Sorry for any confusion Aaron, I can confirm that the 22" Wide Vent Hood #VE78SR is 18" deep as you can see in the picture below.

view full answer...

Answer 9

The Replacement Fan Motor for Ventline Range Hoods #BVD0278-00 will work well in the manner you stated. You can simply connect the ground wire and the power wire while wire nutting the 3rd wire for the same function. This simply will give you the…

view full answer...

Answer 10

The CC316-01 number you referred to is the original part number of the fan motor. Is it a replacement fan blade or motor you're needing? If that's the case, you'd use the #BVD0218-00-R replacement motor. If you were needing a replacement…

view full answer...

Answer 11

Yes! The Replacement Fan Motor for Ventline Range Hoods part #BVD0278-00 is correct for your Ventline Range Hood PR-4. I was able to confirm this with my contact at Ventline. The replacement process is super easy according to our customers. There are…

view full answer...

Replacement Range Fan Motor for Ventline Range Hoods

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching