Difference Between Hub/Drum # 8-219-4UC3-EZ and # 42866UC3-EZ
Question:
What is the difference between this H/D assy part # 8-219-4UC3-EZ and H/D Assy 42866UC3-EZ?! Side by side comparison using eTrailers compareinch reveals nothing conclusive. I have 6Klb/6Klb csa axles with 8-bolt 6.5, installed on a 2006 Keystone Challenger 5th wheel, and need to order new seals for when I replace the Brake assemblies. I have not had them off yet as I want to have the seals on hand before I start. Thanks for your time
asked by: Gary R
Expert Reply:
The only difference between the two hubs is the inside dimension of the grease seal included with the hub drum.
The # 42866UC3-EZ uses a 10-36 grease seal with a 2.25 inch inside diameter and the # 8-219-4UC3-EZ uses a 10-10 grease seal that has a 2.125 inside diameter.
To determine which is compatible with your existing spindle, you will need to use a digital or dial caliper to measure the surface of the spindle that the grease seal rides against (see diagram). If this surface of your spindle measures approximately 2.125 inches, go with the # 8-219-4UC3-EZ. If that surface measures around 2.25 inches, choose the # 42866UC3-EZ.
Products Referenced in This Question
Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- EZ Lube
- 25580
- 14125A
- For 5200 lbs Axles
- For 6000 lbs Axles
- For 7000 lbs Axles
- 1/2 Inch Stud
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 1/2" Studs
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb Axles - 12" - 8 on 6-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 12" - Left/Right Hand Assemblies - 7K
- Shop: Dexter Trailer Hub and Drum Assembly for 5,200-lb to 7,000-lb E-Z Lube Axles - 12" - 8 on 6-1/2
- Video: Dexter Trailer Hub and Drum Assembly Installation 42866UC3-EZ
- Shop: Dust Cap Driver Tool - Medium - for 2.440" OD Grease Caps
- Shop: Grease Seals 10-36 (pair)
- Video: Review of Redline Trailer Ramp Springs - Right Hand Single Ramp Spring - RS16933RH
- Shop: Trailer Hub and Drum Assembly - 7,000-lb Axles - 12" Diameter - 8 on 6-1/2 - Pre-Greased
- Shop: Brake Controller
- Search Results: electric brake controller
- Video: Review of Dexter Trailer Hubs and Drums - Hub with Integrated Drum - 42866UC3-EZ
- Q&A: Solution for Over Adjusted Never Adjust Brakes
- Q&A: How to Initially Adjust the Dexter Nev-R-Adjust Electric Trailer Brakes
- Q&A: How to Manually Adjust Dexter Electric Brake Assemblies
- Q&A: How to Pick Out Correct Replacement Seals for a Trailer Hub
- Search Results: rg06~070
- Video: Review of Dexter Axle Trailer Brakes - Electric Drum Brake Kit - 23-180-181
- Q&A: How Do the Heavy Duty Ramp Springs Install on a Trailer and Ramp
- Q&A: Big Tex Trailer Ramp Replacement Springs
- Q&A: Ramp Assist Recommendation for Toy Hauler Trailer
- Video: CE Smith U-Bolt Kit for Round Trailer Axles Review
- Video: Review of TruRyde Trailer Spindles - Replacement 42 EZ Lube Spindle - TRU37FR
- Search Results: trailer drop axle
- Search Results: 3801250
- Search Results: coupler
- Search Results: e99011
- Search Results: ez lube spindle
- Video: etrailer Trailer Hub and Drum Assembly Installation akhd-865-7-2-ez-k