Is There Difference Between Stealth Hitches we Offer and Direct From Stealth Hitches

Question

Question:

I am thinking about getting the 2017 Volvo v60 Stealth rack towing combo hitch, SH97FRT. Are there any differences between the Stealth hitch you sell and the what I would get directly from Stealth Hitch factory? Specifically Stealth Hitch says the wiring from them is a Volvo branded part? Id like to take advantage of your free shipping but I did a lot of research on the Stealth Hitch and would like to be sure what you sell is exactly the same thing they sell.

asked by: Ken

0

Expert Reply:

There is absolutely no difference whatsoever between the Stealth Hitches products we sell and what would come directly from the Stealth Hitches factory.

The products are exactly the same, including the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit # SH32VR which fits your 2020 BMW X7.

I have added a link to the installation instructions for you to check out as well of the Stealth Hitches Hidden Trailer Hitch Receiver with Towing Kit # SH32VR.

expert reply by: Kyle S

0

Answer 1

The Stealth hitch that fits your 2018 Volvo XC60, #SH87FR, will allow your hands free liftgate to still function. You'd just have to kick to the sides of the hitch opening and it will open. I attached an install video for this hitch for you to…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 6

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 9

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Is There Difference Between Stealth Hitches we Offer and Direct From Stealth Hitches

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching