Replacement Hub Options To Upgrade from 4 on 9.44 Inch Bolt Pattern
Question:
I have a vintage 4 on 9.44 wheel and a 7 x 15 tire. I was wanting to buy a spare tire but noticed these vintage wheels are a bit pricey. Is there a way I can change the wheel size on my trailer? It has electric brakes
asked by: Jordan G
Expert Reply:
You likely can change the hubs on your trailer to give you a more common bolt pattern. To determine the correct fit you will need to pull one of your hubs and get the bearing number printed on the face of the inner and outer bearing.
If you are unable to read the number, then you can use a digital caliper like # PTW80157 to measure the spindle at the bearing and seal locations. With those numbers we can determine the correct fit for a replacement hub/drum to work with your brakes. I've attached a photo and video to assist.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Dexstar Steel Spoke Trailer Wheel - 15" x 6" Rim - 6 on 5-1/2 - White Powder Coat
- Trailer Tires and Wheels
- Wheel Only
- 15 Inch
- 6 on 5-1/2 Inch
- Steel Wheels - Powder Coat
- Dexstar
more information >
Continue Researching
- Shop: Dexstar Vintage Steel Wheel w/ +5 mm Offset - 14" x 5-1/2" Rim - 4 on 9.44
- Shop: Dexstar Vintage Steel Wheel w/ +5 mm Offset - 15" x 5" Rim - 4 on 9.44 - Silver
- Search Results: dexstar wheel only
- Search Results: 4 on 944 hubs
- Q&A: Does Dexstar Vintage Steel Wheel AM20395 Fit A 1988 Kit Companion Model 251 Fifth Wheel Trailer
- Q&A: Can a Trailer Axle be Converted to an EZ Lube Axle by Replacing Spindles
- Search Results: lm48548
- Search Results: 10 inch brakes and hub
- Search Results: l44610
- Search Results: lm48510
- Search Results: p10489
- Shop: Timken Bearing Kit, L44643 Inner/Outer Bearings, L44610 Inner/Outer Races, 204507 Seal
- Shop: Trailer Axle Beam with Easy Grease Spindles - 94" Long - 7,000 lbs
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Replacement Trailer Hub Bearing - LM48548
- Shop: Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs
- Q&A: How to Select the Correct Hub to Change Out a 4 on 9.44 Inch Bolt Circle Wheels with 5 on 4-1/2
- Shop: Trailer Hitch
- Q&A: Need Vintage Dexstar 15 x 6 Star-Pattern Rim With 4-on-9.44 Bolt Pattern
- Q&A: Selecting New 5-Bolt Hubs to Replace Original 4-Bolt Hubs on 1970's Dexter 3500-lb Axles
- Q&A: Dexstar Vintage Steel Wheel # AM20208 or Hub Upgrade
- Q&A: 5 Lug Hub Replacement Recommendation for Dexter 4 Lug Hub
- Video: Dexstar Tires and Wheels - Wheel Only - AM20395 Review
- Video: etrailer Easy Grease Trailer Hub and Drums Installation - 2020 K-Z Sportsmen Classic Travel Trailer
- Video: etrailer Generators 333-0007 Review
- Article: Where to Position the Trailer Axle?
- Article: 7 Common Questions Everyone Has About Trailer Tires