Replacement Hinge for Extang Trifecta Tonneau Cover

Question

Question:

I am trying to figure out what hinge replacement i need. It is the last hinge before the end. Thanks

asked by: Jeremy

0

Expert Reply:

The Extang Trifecta 2.0 Soft Tonneau Cover is a nice tonneau but sometimes those spots with tension wear out. The hinge closest to your tailgate is the Replacement Tailgate Hinge # EX1033.

The hinge closest to your cab would be the Replacement Hinge # EX1032. Both of these hinge replacements are direct replacements for your Trifecta.

Another spot that needs to be replaced from time to time is the latch that keeps the tonneau secure Replacement Tail Clamp Assembly for Extang Tonneau Covers # EX31003005. This is also a direct replacement.

I attached a video for the hinges.

expert reply by: Zach D

0

Answer 1

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 2

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

The Extang #EX1032 replacement hinge that you referenced is made for Extang Trifecta and Extang eMAX folding tonneau covers as a hinge replacement. I reached out to my contact at Extang and found out that they also make the Gator covers and that this…

view full answer...

Answer 7

Yes, the Replacement Corners with Pads #EX4211 can also fit the Lund Genesis trifold tonneau covers. To ensure that this is the correct part for your cover you can check your owners manual with the parts breakdown. You should see part 4211 as a…

view full answer...

Answer 8

I have a complete replacement option for you, but unfortunately Extang discontinued the Extang Solid Fold Tonneau Cover 56450 you have on your 2014 Chevrolet Silverado back in 2015 and no replacement parts are available any longer. For a replacement…

view full answer...

Answer 9

If you are having trouble with your etang Solid Fold 2.0 rear panel popping back into place them I recommend checking out the attached installation/ removal instructions. If you are following those instructions (installing it side-to-side) and you…

view full answer...

Answer 10

The replacement hinge for the panels of the Extang Trifecta 2.0 is the hinge part #EX83645-64. Your picture didn't make it through but I attached a picture of what this hinge looks like installed. If you send me the picture you have I can check…

view full answer...

Answer 11

Sometimes when new the Weathertech floor mats will have a bend or will want to curl up based on how the mat was stored in it's packaging. It will eventually regain it's proper shape, but Weather tech has recommended to us to let it sit in the…

view full answer...

Answer 12

The Replacement Hinge for Extang Trifecta and eMAX Soft Tonneau Covers #EX1032 you were looking at will replace either the driver or passenger cab side hinge. If you are needing the tail gate side hinge you will need the #EX1033 instead. I included…

view full answer...

Replacement Hinge for Extang Trifecta Tonneau Cover

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching