UFP Hubs Spare for Trailer that Uses Bearing Numbers L44649 L68149
Question:
I don't think that's completely right. Everything looks correct except the grease seal. The National 473317 grease seal that my hub uses has an ID of 1.688", the kit you showed me has a seal ID of 1.719".
asked by: Chad M
0
Expert Reply:
The CE Smith hub part # CE13511 is exactly the hub you need as a spare. It matches the bearings and grease seal inner diameter so it would fit and work great. It also comes pre-greased.
expert reply by:
Jameson C
0
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- CE Smith
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Replacement Hub for DICO 45264
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement For 11033L Idler Hub and Spindle Ranger Boat Trailer
- Q&A: Hub Replacement Recommendation for DICO Hub part 45264
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Dimensions of CE Smith Trailer Hub Assembly w/ Carrying Case for 3,500-lb Axles
- Q&A: Titan Replacement for Dico Trailer Idler Hub 17214
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Wiring Diagrams
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: My Trailer Hitch Doesn't Fit
Chad M.
7/3/2020
I don't think that's completely right. Everything looks correct except the grease seal. The National 473317 grease seal that my hub uses has an ID of 1.688", the kit you showed me has a seal ID of 1.719".