Replacement Hub that Replaces Older Hub with Bearing Race L44610
Question:
Looking for a hub for a vintage camper. Inner bearing is labeled L44610 outer is the same. It is a 4 bolt with lugs that screw in to hub. Looking for replacement as the outer race spins freely.
asked by: Joshua A
0
Expert Reply:
We have hubs with a 4 on 4 inch bolt pattern that have wheel studs that fit your spindle based on the bearing race number you listed with the part # AKIHUB-440-2-1K but we don't have anything that fits with wheel bolts either.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement 1/2-20 Wheel Stud For Reliable 1206 Trailer Hub
- Article: Most Popular Wheel Bearings
- Article: Rooftop Cargo Carriers
- Q&A: What Is the Difference Between a BTR and BT8 Spindle
- Article: RV and Camper Types, RV Classes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Q&A: Trailer Hub Recommendation with 4 on 4 inch Bolt Pattern and Bearings L44643
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Solution for Replacing Dexter 8-222 Trailer Hubs and Bearings
- Q&A: How to Measure the Angle of Trailer A Frame To Determine if a 50 Degree A Frame Coupler will Fit