Can the Buyers Products Door Check Be Used with a Lower Door Closer
Question:
We have a 2017 Lance Model 1985 TT with entry door designed to stand open at 90 degrees If the door goes back further, it hits an awning style window if open, or the side of the trailer if not. It has a light weight door closerinch at the bottom that holds the door in place at 90 degrees - until a blast of wind comes along and slams the door back against the side, destroying the closer. Dealer tried a heavier bed closerinch and it was far too strong - gradually bent the frame in closing. So 1 Will this check hold the door open at 90 degrees regardless of which way the wind blows? 2 Is there any reason not to use it at the top of the door in conjunction with the existing closer at the bottom? 3 The screen door latches onto the hard door when closing will this check normally fit and work in that arrangement? And a comment: It would be very helpful if your photos or video showed this product actually installed on a TT. Sorry...trailer is in storage, so no picture.
asked by: Myron K
Expert Reply:
I'll try to answer these in order for you. First, the Buyers Products Door Check and Hold Back # 337BM2395AA11 does hold the door open at a 90 degree angle with 30-lbs of pressure, so as long as it's not a heavy wind it should hold everything just fine; your lower closer should help give this some added strength and resistance against the wind as well in this case. There is not a way to lock this in place though, so it's not going give you complete resistance to wind.
Second, I don't see any reason why it can't be used in conjunction with the lower closer and that will help make it more sturdy to fight off heavier winds.
Third, this door check mounts inside the door jam to the top of the door frame and won't interfere with closing the door and your door will still latch.
If you're actually looking for a solution to completely lock the door into place you may want to consider the Kwikee T-Style Door Holder w/ Bumper for RVs - 6" Long # LC381412, which installs T-stoppers that can be used to hold your screen door open.
Products Referenced in This Question
Kwikee T-Style RV Door Holder w/ Bumper - 6" Long Arm - White
- RV Door Parts
- Holders
- T-Style
- White
- Kwikee
more information >
Product Page this Question was Asked From
Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded
- Accessories and Parts
- RV Door Parts
- Door Holder
- Buyers Products
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Shop: Buyers Products 90-Degree Door Check and Hold Back - Spring Loaded
- Video: Review of Buyers Products - RV Doors - 337BM2395AA11
- Q&A: Where to Install Buyers Products Door Check and Hold Back
- Video: MaxxAir Standard RV and Trailer Roof Vent Cover Installation - 2016 Keystone Cougar XLite Fifth Whee
- Shop: MORryde RV Door Latch Extender
- Q&A: Could Buyers Products Door Check and Hold Back Item # 337BM2395AA11 Fit Tractor Cab
- Shop: Suspension Enhancement
- Shop: Magnetic Door Holder for RV Doors - Qty 1
- Q&A: Will Buyers Products Door Check and Hold Back # 337BM2395AA11 Help with Wind Grabbing Door
- Q&A: How Does Buyers Products Door Check and Hold 337BM2395AA11 Get Installed?
- Video: JR Products T-Style Hook and Keeper Door Holder Review 37210434
- Video: JR Products Enclosed Trailer Ramp Door Rubber Bumper Review
- Video: Review of JR Products Enclosed Trailer Parts - Doors - Ramps - 37210715
- Video: Review of Buyers Products Enclosed Trailer Parts - Doors - BP64FR
- Shop: Replacement Key for Bauer AE Series Lock - AE010 - Qty 1
- Shop: T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer - 6" Hook - Plastic - Black
- Shop: Buyers Products Hook and Keeper for Enclosed Trailer Door - Zinc Plated
- Search Results: door holder
- Shop: Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black
- Video: Review of Lippert RV Door Parts - Entry Door Hinge - LC95VR
- Q&A: Which Side of the Buyers Products Door Check and Hold Back # 337BM2395AA11 Mounts Close to Hinge
- Q&A: How To Install the Buyers Products 90-Degree Door Check and Hold Back
- Q&A: Installation of the Door Check and Hold Back part # 337BM2395AA11
- Search Results: screen door push bar
- Search Results: trailer door springs
- Search Results: exterior door
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting Brake Controller Installations
- Shop: Trailer Hitch