Correct Underbed 5th Wheel Mount for a 2009 Ford F-350

Question

Question:

I am looking for an underbed fifth wheel attachment for my 2009 f350. I am looking for the bung style mount.

asked by: Jeremy M

0

Expert Reply:

The correct underbed fifth wheel mounting system for a 2009 Ford F-350 (Excluding Cab and Chassis Models) is the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel Trailer Hitches part # RP30073. This will then work with the Reese M5 Series 5th Wheel Trailer Hitch part # RP30922.

Please note, there are no underbed fifth wheel mounting systems for cab and chassis models.

expert reply by: Conner L

0

Answer 1

If your bed liner is the spray-in type, you can simply install the fifth wheel hitch rails directly on top of it. However, if your bed liner is the hard plastic drop-in type, the liner would need to be trimmed away so that the bed rails have direct…

view full answer...

Answer 2

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 3

While we may have an option for you, we do not have the exact specs on your Allis grease seal part number 5013 29772. However, with the 1.6" ID and 2.5" OD measurements you provides, that is very close to our #58846. This particular grease…

view full answer...

Answer 4

I really wish we had replacement parts still for the Atwood couplers but since they've been out of business for so long we don't have any way to get the parts you are wanting.

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 8

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 9

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 10

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

The trailer hitches that fit a 2023 Ford Escape will not fit the Plug-In Hybrid version so we'll need to look into some alternative options so you can carry your extra cargo. If you just need to carry some bikes then I recommend getting the…

view full answer...

Correct Underbed 5th Wheel Mount for a 2009 Ford F-350

Products Referenced in This Question

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching