Do Spring Seats Need to be Cut Off to Install Dexter Trailer Springs Over-Under Conversion Kit
Question:
axle flip kit install on 2 3/8 jayco camper Do the original, welded spring perches need to be cut off to accommodate the new tie plate placement on the bottom of the axle? this is on a over to under the leaf spring axle flip
asked by: Frank
0
Expert Reply:
Nope! The beauty of the Dexter Trailer Springs Over-Under Conversion Kit # K71-384-00 is that you're simply moving the axle below the leaf spring and you don't have to grind off or weld anything on. I have attached the installation instructions and a photo of the finished product where you can see the original spring seat still in place on the axle.
expert reply by:
Jon G
0
Product Page this Question was Asked From
Dexter Trailer Springs Over-Under Conversion Kit
- Trailer Suspension Parts
- Alignment and Lift Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Double Eye Springs
- Round Axle - 2-3/8 Inch
- Single Axle
- Dexter
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Which Trailer Suspension Equalizer Kit Fits Trailer with 31 inch Wheelbase
- Video: Dexter Trailer Springs Over-Under Conversion Kit Installation K71-384-00
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Shop: Dexter Trailer Springs Over-Under Conversion Kit
- Video: etrailer Trailer Suspension - Leaf Spring Suspension - AP233 Review
- Q&A: Which Trailer Axle Over Under Kit Fits Trailer Axle with 7.5 inch Circumference
- Q&A: Are Bushings Required with the Tandem-Axle Trailer Equalizer Kit # AP233
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Shop: Lippert Tandem Axle Equa-Flex AP Kit - Wet Bolts - 3-1/8" Long Shackles
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 3-1/4" Front/Rear, 3-5/8" Center
- Shop: Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 5-3/4" Long - 9/16" Center Hole
- Shop: Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Q&A: Does Changing From A 4 Leaf To A 6 Leaf Spring Add To Ride Height?
- Search Results: leaf springs
- Search Results: leaf spring clamp
- Search Results: spring seats
- Search Results: 26 inch leaf spring
- Video: Redline Trailer Suspension - Leaf Spring Suspension - APUBR-35 Review
- Video: 3 Inch Round Trailer U-Bolts Installation
- Q&A: Can Axle Be Ordered with Loose Spring Seat Perches?
- Video: Dexter Axle Trailer Suspension - Leaf Spring Suspension - K71-384-00 Review
- Search Results: 26.5 inch leaf springs
- Search Results: over under conversion kit
- Q&A: Replacement 3,500-Lb Axle for 2006 Fleetside Bayside Popup Trailer
- Q&A: Does the Dexter Trailer Springs Over-Under Conversion Kit Require Welding
- Shop: Trailer Wiring
- Search Results: bump stops
- Video: TruRyde Trailer Suspension TRSS300 Review
- Shop: Suspension Enhancement
Thomas
9/5/2020
I have been looking at the over/under kits. I need to level my camper as I just bought a 2020 ram 2500 4x4 and my camper is not level. I lowered my hitch in my truck. I raised my king pin box as high as possible and I still need clearance. My springs already sit on top my axle. I have a 2015 forest river Sierra select 301ok. Please help!