How Many Sets of DL21741 Bunk Rollers Recommended for a 20 Foot Pontoon Boat Trailer
Question:
How many sets do you recommend and where should they be installed along the 20’ long bunks? The pontoon itself is a 20’ with a 50 hp outboard. It’s overall weight is below 3000 lbs.
asked by: Susan
1
Helpful Expert Reply:
Two sets of the Duttton-Lainson # DL21741 bunk rollers would certainly be sufficient. I'd install the rear set about 3 feet in on the bunks, leave about 3 feet of space and install the other set. This will provide the most support for the rear 2/3 of the boat, where most of the weight is concentrated.
expert reply by:
Mike L
1
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Rollers
- Roller Bunk
- Black Rubber
- Dutton-Lainson
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Can I Convert Regular Bunks To Roller Bunks
- Q&A: Size of U-Bolt Slots in Dutton-Lainson # DL21742 Roller Bunk Bracket for Roller Bunks DL21740/41
- Q&A: How Far Should Rollers Install Behind Rear of Trailer Frame
- Q&A: Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
- Q&A: Recommended Roller Bunks For Tracker Deep V Boat
- Q&A: Do Roller Bunk Brackets DL21742 Require 7/16" U-Bolts?
- Q&A: Will Using Roller Bunks on a Boat Trailer Damage the Boat
- Article: Boat Trailer Showdown: Bunks vs. Rollers
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Best Ladder Racks
- Article: RV Cell Boosters, How Do They Work?
- Article: Best Boat Trailer Jacks
- Article: Best Tire Chains