Correct Replacement Hub/Drum for 1994 Haulmark Elite 24' Trailer
Question:
Hello. I had a hub failure and wanted to make sure this the accurate replacement before purchasing. I have a 1994 haulmark elite 2. 24ft enclosed with 3500k axles 4.5 bolt pattern with electric brakes. I have attached A pic of the broken hub and one of which is still in working order. Please confirm and I will order. This is our racecar trailer and are slated to race in roughly a week. Thank you
asked by: Mike G
Expert Reply:
The Trailer Hub and Drum Assembly part # AKHD-545-35-K for standard or part # AKHD-545-35-EZ-K for easy lube are what you need to replace the hub on a 1994 Haulmark Elite 24' Trailer.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Q&A: How do Wheel Studs Typically Get Removed From Trailer Hub
- Search Results: 10 electric brake drum
- Shop: Trailer Hub Wheel Stud - Drive In - 1/2" Diameter x 2" Long - Qty 1
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Replacement Trailer Hub Wheel Stud, Drive-In, 1/2" x 1-13/16" (Qty 4)
- Video: Redline Tires and Wheels RG03-040 Review
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-545-35-EZ-K
- Shop: Trailer Wiring
- Q&A: Recommended Replacement Hub/Drum and Brake Assembly for Typical Dexter 3500 lb Axle
- Q&A: eTrailer Axle Technology Trailer Hub and Drum Assembly compared to Titan Hub and Drum
- Q&A: Comparing the E-Z Lube Hubs to the Standard Hub Assemblies for Trailer Axles
- Q&A: Recommended 5 on 4-1/2 Hub for 3,500 lbs Axles w/ L68149 Inner Bearing and L44649 Outer Bearing
- Shop: Brake Controller
- Search Results: rv vinyl trim insert
- Shop: Trailer Hitch
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Camco RV Vinyl Trim Insert - Black - 100' Long x 1" Wide
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: etbc7
- Search Results: 7894
- Search Results: 76031
- Search Results: rm~061
- Search Results: 119190kit
- Q&A: Parts Needed to Install 7-Way Trailer Wiring on 2013 Infiniti JX35
- Q&A: Compatibility of Curt Echo Brake Controller With 2013 Infiniti JX-35 and Camper with LED Taillights
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Video: TruRyde Electric Brake Assembly Installation
- Video: etrailer Electric Trailer Brake Kit Review and Installation