Replacement Idler Hubs for 4 x 7 Tarter Utility Trailer
Question:
I am looking for a wheel hub assembly for a Tarter brand 4 x 7 utility trailer. According to the sticker on it, it has a 2000 lb cambered axle. Thanks
asked by: Sam H
Expert Reply:
A 2000 lb axle uses a straight spindle, with both the inner and outer bearing being the same size. The hubs needed will depend on the number of lugs your current hubs have and which inner/outer wheel bearings are used. I'll give you a run-down on the possibilities below.
If you have a 4 lug wheels, and a L44643 inner and outer bearing, you'd use # AKIHUB-440-2-1K for 5 lug wheels, use
# AKIHUB-545-2-1K. Both fit wheels from 8 to 12 inches.
If you have the L44649 inner and outer bearing, use # AKIHUB-440-2-2K for a 4 bolt wheel or # AKIHUB-545-2-2K for a 5 bolt wheel. Either is compatible with 8-12 inch wheels, and all the hubs I mentioned include the bearings, races, grease seals, dust cover and lug nuts.
Products Referenced in This Question
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44643 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2,000-lb Axles - 4 on 4 - L44649 Bearings - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 4 on 4 Inch
- 8 Inch Wheel
- 10 Inch Wheel
- 12 Inch Wheel
- 13 Inch Wheel
- 14 Inch Wheel
- etrailer
more information >
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44643
- L44643
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 10 Inch Wheel
- 12 Inch Wheel
- etrailer
more information >
Continue Researching
- Video: Review of Bearing Buddy Trailer Bearings Races Seals Caps - Caps - BB1980A
- Q&A: Trailer Hub that Can Fit on 2,000 lb Axle with 5 on 4-1/2 inch Bolt Pattern
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Search Results: snowbear trailer parts
- Video: Review of Dexter Trailer Hubs and Drums - Hub - 34822545BX
- Video: Review of TruRyde 1 Inch Diameter Trailer Spindle Castle Nut - 165686
- Q&A: Correct Replacement Idler Hub for a 1998 Starcraft Stardust Popup Camper
- Q&A: Troubleshooting Replacement Hubs Not Fitting Over Detail K2 Utility Trailer
- Q&A: Replace Hub Assemblies With Bearing Buddies For A 2,000 Lb. Trailer Axle
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: Washer For 1" Spindle
- Shop: Trailer Idler Hub Assembly for 2K Axles - 10" to 12" Wheels - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Spindle Nut 1"
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Q&A: Pre-Greased Trailer Hub for Floe Pro 100 Snowmobile Trailer
- Search Results: 185 x 85 x 8 trailer tire
- Search Results: washer
- Search Results: 8" wheel
- Search Results: trailer jack
- Search Results: hub washer
- Q&A: Recommended 2200lb Axle That Uses 3500lb Hubs and Bearings
- Search Results: l44649
- Q&A: Replacement Hubs for 1997 FLOE Pro 100 Plus Snowmobile Trailer
- Video: Kenda Tires and Wheels - Tire with Wheel - AM31208HWT Review