How Does the Redarc Tow-Pro Elite Install in 2018 Ford Edge Without Trailer Wiring
Question:
If my vehicle doesnt have factory 7or 4 wire plug, where can i tap? Ford edge 2018
asked by: Luc
Expert Reply:
You will first need to obtain trailer wiring to install the Redarc Tow-Pro Elite Trailer Brake Controller part # RED44FR on the 2018 Ford Edge. The Redarc will need to tie into the cold side of the brake light switch to function properly. First you will need a 4-way harness part # 118677 if the Ford Edge is a Sport or Titanium model, you will need part # 118669 if the Ford Edge is a SE or SEL model. The Tekonsha brand is a very reliable brand of wiring that tends to last a bit longer compared to the other brands.
Then you will need a 4-way to 7-way upgrade kit part # ETBC7. The kit comes with everything you need to install the Redarc Tow-Pro Elite brake controller and a fully functional 7-way on the Edge. I have attached an installation video for all of the wiring and a diagram for your reference.
The Redarc brake controller is a nice choice because of it's sleek design that only requires a small knob be installed in plain view instead of a bulky brake controller box.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Dash-Mounted Knob
- Hidden
- Up to 3 Axles
- Indicator Lights
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Trailer Maintenance Schedule
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Tire and Wheel Size to Replace 18.5x8.5-8 on Trailer
- Q&A: Bearings and Seal Used for AL-KO 7290 Trailer Hubs for #99 Spindles
- Article: REDARC Tow-Pro Liberty vs Tow-Pro Elite
- Q&A: Replacement Fulton Winch Strap Measuring 1-7/8 Inches by 14 Feet Long
- Article: How to Measure for Trailer Hitch Drop
- Q&A: AxleTek Brake Assembly Recommendation for 8k Axles with 4 Bolt Mounting Pattern
- Q&A: What is Difference Between Redarc Tow Pro Liberty and Elite