What is the Hub Pilot Size and Grease Flange Size of the 84655UC1
Question:
Need to know what the pilot size of the hub is where the center of the wheel fits over the hub at the wheel mounting flange. Someone else asked a similar question and the reply said it was 3.09” and the dimension was supported with a picture showing the dimension of the flange where the grease cap mounts. However this is a tapered hub and the critical diameter is at the wheel flange. Maybe the dimension at the wheel flange is 3.09” and the arrow on the picture is not drawn correctly. Could you please clarify if the 3.09 is at the grease cap flange or at the wheel flange. Thanks
asked by: Clint
Expert Reply:
The grease cap flange diameter of the Trailer Idler Hub Assembly # 84655UC1 is going to be 1.986" and the outer diameter will be 3.09". The picture you're referring to does show the outside hub pilot diameter on this hub and not the grease cap flange diameter, but it might be confusing since the inside edge and outside edge of the hub kind of blend together because of the shading on the photo.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Redline
more information >
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 6 on 5-1/2
- Video: Review of Dexter Axle Trailer Hubs and Drums - Agricultural Idler Hub Assembly - 42660UC1
- Video: Review of etrailer Trailer Hubs and Drums - Hub with Integrated Drum - AKHD-655-6-K
- Shop: Dexter Trailer Hub and Drum Assembly - 5,200-lb E-Z Lube Axles - 12" - 6 on 5-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 6K Axles - 6 on 5-1/2 - Pre-Greased
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 6 on 5-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 6,000-lb Axles - 12" Diameter - 6 on 5-1/2 - Galvanized
- Q&A: What is Hub Pilot Diameter of Trailer Hub # AKIHUB-550-35-K
- Q&A: Diameter of 4 on 4 Inch Idler Hub Center For Wheel Pilot Hole Compatibility
- Q&A: What is the Pilot Diameter on a Wheel
- Search Results: dexstar trailer tires and wheels
- Search Results: exhaust tips
- Video: Valterra RV Vents and Fans A10-1302VP Review
- Video: Dexstar Tires and Wheels - Wheel Only - AM20514 Review
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Trailer Hitch
- Article: Most Popular Wheel Bearings
- Q&A: Hub And Drum Replacement for 90865 Rockwell Hub and Drum
- Search Results: 25580
- Shop: Trailer Wiring
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 68149
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: dust cap