Recommended 5th Wheel Prep Package Covers for Puck System  

Since your 2018 GMC Sierra 2500HD has the OEM Prep Package, you can use the Replacement Puck Plug Covers for Elite and Signature Series Fifth Wheel Rails #58199 for the four puck holes which will cover the openings of the hitch to keep dirt and…

We have the exact cover you need to keep the dirt out of the gooseneck hole in your Chevy Silverado with the OEM puck system; the one that fits is from Reese, and is the following part number: - Rubber Hole Cover for Reese Elite Series Under-Bed…

I did some looking and found that the 46210 and 46845 hubs you currently have use the same #L68149 inner bearing and #L44649 outer bearing. However, as we do not carry the Tie Down Engineering Vortex hubs, I cannot say what all will fit them,…

The B and W Companion Hitch Base part #BWRVB3710 which is the lower portion of the hitch #BWRVK3710 does fit the OEM rail kit of the 2022 Chevy Silverado 2500HD. We confirmed this with B and W.

We do have tonneau covers that will be better when hauling a 5th wheel. Folding covers are not the best option because when folded up it sits above the bed rails quite a bit. This could result in damage to your trailer, the tonneau and your 2019 Ford…

The only trailer tire sensors that will work with the factory TPMS on your 2021 GMC Sierra 3500HD Denali is the GM kit 85110397 that is sold through GM. These sensors will need to replace the valve stems on your trailer wheels. I recommend staying…

Great question! You can actually purchase the 2019 GMC Sierra 3500 Denali with a factory puck package (that sits flush with your truck bed) or there are aftermarket options for using a 5th wheel hitch as well (which are offered with rails above or…

To raise your 2020 Grand Design Reflection 337 fifth wheel trailer you have two options. 1. If you have double-eye leaf springs that are under the axle (underslung) you can "flip" them into the overslung position using either part…

The Correct Track Tandem Lift Kit part #RR23QX that you referenced is exactly what you are looking for. This fits all RVs with tandem axle setups like your 2021 Grand Design Reflection 150 Series 268BH regardless of if the axles are above or below…

For a tandem axle trailer like yours the best solution to gain more lift would be with the Correct Track lift kit part #RR23QX which comes with everything needed to lift both axles 2-1/4 inches.

The closest brake assemblies we offer to the dimensions you said you have are part #23-105-09 for the left hand, and #23-106-09 for the right. The 4-hole bolt pattern is 3-1/4 inches for the top two holes, 2-1/2 inches for the lower two holes and the…

The mounting holes (4 hole pattern) on Dexter brake assembly, #23-106-09, are 3.09 inches on center for the top two holes and 2.55 inches apart on center for the bottom 2 holes. Top to bottom they are 3.40 inches apart on center. The holes can…