How to Obtain Replacement Keys for SportRack Roof Rack SR1010

Question

Question:

is it possible to get a replacement key for my SportRack Semi-Custom Roof Rack for Naked Roofs - Square Crossbars - Steel - 50 Long Item # SR1010. I have a 2017 4 door Honda accord sport. I misplaced my keys so i cant take it off.

asked by: Franchesca H

0

Expert Reply:

You sure can. We'll just need to know number stamped into the metal next to the key slot. For instance, if the key number is N030, you'd need replacement key THN030.

So the replacement key number for your lock would be "THKEYNXXX" with the X's being replaced by the 3 or 4 digit number on your lock.

I've provided a photo showing where the lock number is located.

expert reply by: Mike L

0

click to enlarge

Answer 1

It sounds like what you need is the #THKEYN009 replacement key for your SportRack #SR1010 roof rack. We've gotten questions about a number 600 lock core/key, however, the number 600 was never used for the production of lock cores or keys in the…

view full answer...

Answer 2

Thanks for the info, I believe you'll be needing the Replacement Key for Sportrack Racks and Carriers #THKEYY016.

view full answer...

Answer 3

Yes, the replacement key part #THKEYN012 would work as a replacement key for your Karrite SportPak that has key number 012.

view full answer...

Answer 4

Yes. Based on your information, the part you need is the Replacement Key, Item #THKEYN012.

view full answer...

Answer 5

The correct replacement key for your SportRack roof rack with a lock that has K012 is part #THKEYN012.

view full answer...

Answer 6

The correct key for your Sportrack bike rack is the Replacement Key for Thule and Sportrack Racks and Carriers part #THKEYN012. If you can send me a photo of the bike rack I can see if we have the other missing pieces you need.

view full answer...

Answer 7

If you are looking for a key replacement for Yakima Racks and Carriers Key Y045, I am pleased to have Item #Y8873-045 for you as a direct replacement.

view full answer...

Answer 8

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 11

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

How to Obtain Replacement Keys for SportRack Roof Rack SR1010

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching