Correct Replacement for Dexter Hub/Drum 8-415
Question:
good day, height distance from floor to bottom of outer bearing cup grove is 7 5/8 distance from bottom of outer bearing cup grove to magnet face of drum 3 3/8 also drum and hub one piece. will also be looking for shoes and magnets one axle machine is a rayco 1824 woodchipper 2013
asked by: Mike G
Expert Reply:
I was able to cross reference the Dexter Hub/Drum 8-415 to the Dexter Trailer Hub Drum Assembly part # 8-430-5UC3 which should be an exact replacement. I don't have any depth measurements of the above/drum but what you would need to measure to confirm is the inside of the contact surface on the hub where the shoe rides and this should measure 12-1/4" x 3-3/8". If so, you should be good to go.
In regards to braking assemblies, the best option we have is the Dexter Brake Kit part # 23-450-451 or part # 23-410-411.
Products Referenced in This Question
Dexter Hydraulic Drum Brake Kit - Duo Servo - 12-1/4" - Left and Right Hand Assemblies - 9K/10K
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Dual Servo
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Dexter Nev-R-Adjust Electric Trailer Brakes - 12-1/4" - Left/Right Hand Assemblies - 9K to 10K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 12-1/4 x 3-3/8 Inch Drum
- 9000 lbs Axle
- 10000 lbs Axle
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Shop: Hopkins 7-Way Blade Style Connector with Molded Cable - Trailer End - 8' Long - Auto Standard
- Shop: Replacement Trip Spring for Boss Snow Plow - 14-1/2" Long
- Shop: Fifth Wheel Hitch
- Shop: NOCO GEN On-Board Battery Charger - AC to DC - Waterproof - 2 Bank - 12V - 10 Amp
- Shop: Dexter Trailer Hub and Drum for 8,000-lb E-Z Lube Axles - 12-1/4" Diameter - 8 on 6-1/2
- Shop: Replacement Crank Handle Assembly for Bulldog Sidewind Jacks - 6-1/2" Radius
- Shop: Replacement Brake Pads for Dexter Disc Brakes - 10,000 lbs and 12,000 lbs - Semi-Metallic - Qty 4
- Shop: Tool Box
- Search Results: battery charger
- Search Results: aps5
- Search Results: axle
- Search Results: 5x45 hub
- Search Results: spare tire mount
- Search Results: bk4~100
- Search Results: bearing kit
- Article: Must Have RV Accessories that Will Make or Break Your Trip
- Q&A: Correct Replacements for Dexter 023-359-00 Left Hand and 023-360-00 Right Hand Braking Assemblies
- Shop: Brake Controller
- Video: Review of SAM Snow Plow Parts - Snow Plow Replacement Parts - 3371304715
- Video: Rebuilding the etrailer and Ram Square Jacks
- Q&A: Location of Brake Controller Connector on 2016 Chevy Silverado 2500
- Video: Curt Brake Controller C51451 Review
- Shop: Gooseneck Hitch
- Video: Polar Hardware RV and Camper Steps PLR6612-A Review
- Video: Polar Hardware RV and Camper Steps PLR817-SS Review
- Video: Review of Polar Hardware RV and Camper Step Accessories - Stainless Steel Grab Handle - PLR6612-SSP