Is JR Hook and Keeper # 37210414B Standard Size for RV Applications
Question:
Door keeper Is their a basic size latch for side door
asked by: Estes
0
Expert Reply:
Most RV door keepers are pretty similar in size but I wouldn't say there is an industry standard for them. The JR hook and keeper part # 37210414B is a pretty standard size but worst case scenario you'd replace the hook and keeper side and you'd be set.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
T-Style Hook and Keeper Door Holder for Enclosed Trailer - 3-1/2" - Plastic - Polar White
- Trailer Door Holders
- Hook and Keeper
- T-Style Hook
- 3-1/2 Inch Hook
- 1 x 2-1/4 Inch Hole Spacing
- Plastic
- JR Products
more information >
Continue Researching
- Q&A: How to Measure Width and Bolt Pattern on a Trailer Wheel
- Q&A: 4-Way Flat to 6-Way Square Adapter for a Coleman Camper
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Should I Use 1/8" or 3/16" Thick Butyl Tape for RV Side Window Installation/Repair
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement E-Z Lube 4" Drop Spindle for 3,500LB Leaf Spring Trailer Axle
- Q&A: Replacement Lenses and Lights for Glo-Brite 118A/117R
- Q&A: Replacement Screen for Ventline Ventadome VD0433 Trailer Roof Vent
- Q&A: Trailer Hitch for a 2020 Chevrolet Express Van Shuttle Bus On Cutaway Chassis
- Article: Must Have RV Accessories that Will Make or Break Your Trip
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: How to Choose the Right Trailer Hitch Class
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide