Height Measurement from Top Step to Top of Mounting Bracket
Question:
I don't want to settle on this step just yet. It is a very tight fit and not giving me the rise/run I want. I am looking at another unit, but again, the dimensions you have posted don't make sense. See LC3725791. Your photo says the front to back bolt hole pattern is 8.75". The next photo down says the entire bracket is only 8.375" long. I suspect the top photo is correct. Please confirm. Thank you
asked by: Thomas C
Expert Reply:
The Lippert Electric Tread Lite Step for RVs # LC353543 has a top step that measures 4-1/2 inches from the top of the step to the top of the bracket frame. I confirmed this with my contact at Lippert/HappiJac who makes this step.
Products Referenced in This Question
Replacement Steps, Motor, and Control for Kwikee RV Electric Steps - Revolution Series
- RV Steps
- Motorhome
- Electric Step
- 24 Inch Wide Step
- 25-9/16 Inch Wide
- 2 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Steel
- Kwikee
more information >
Product Page this Question was Asked From
Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum
- RV Steps
- Motorhome
- Electric Step
- 24 Inch Wide Step
- 25-5/8 Inch Wide
- 2 Steps
- 8 Inch Drop/Rise
- No Ground Contact
- Aluminum
- Lippert
more information >
Continue Researching
- Shop: Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 23-3/4" Wide - Aluminum
- Shop: Lippert Electric Tread Lite Step for RVs - Double - 8" Drop/Rise - 30" Wide - Aluminum
- Q&A: Determining if Lippert Electric Tread Lite Step # LC353621 Will Fit 2014 Coachmen Encounter
- Shop: Plunger and Socket Door Holder for RV or Enclosed Trailer - 3" Plunger - Zinc Plated Steel
- Shop: Plunger and Socket Trailer Door Holder - 2-1/4" Plunger - Zinc Plated Steel
- Shop: Socket with Rubber Insert for Silent Door Holder
- Search Results: door hold
- Search Results: door bumper
- Shop: Rubber Socket for Plunger Door Holder
- Search Results: 372261
- Search Results: door bar lock
- Search Results: steps
- Shop: TorkLift GlowStep Camper Scissor Steps - 2 Steps - Aluminum - 20" Wide - 375 lbs
- Q&A: Dimension of LaSalle Bristol RV Plumbing Roof Vent 34474558B
- Q&A: LaSalle Bristol RV Roof Vent Pipe Replacement
- Search Results: vent cover
- Search Results: 00~933066
- Video: Review of LaSalle Bristol RV Vents and Fans - Plumbing Vent - 34474558
- Video: Review of Lippert Outriggers For Manual RV Steps - LC301704
- Article: Trailer Wiring Diagrams
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Choosing the Right Trailer Wiring
- Shop: Trailer Hitch
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Shop: Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
Tom
4/29/2020
I don't want to settle on this step just yet. It is a very tight fit and not giving me the rise/run I want. I am looking at another unit, but again, the dimensions you have posted don't make sense. See LC3725791. Your photo says the front to back bolt hole pattern is 8.75". The next photo down says the entire bracket is only 8.375" long. I suspect the top photo is correct. Please confirm. Thank you