Correct BOLT Lock Cylinder for Toolbox Keyed to 2008 Chevy Silverado

Question

Question:

I have a 2008 Chevy Silverado and purchased a used utility topper with three locks needing replacement. After reading the description which lock set will fit both the topper and the Truck. The lock that comes close is the Replacement Lock Cylinder for BOLT Toolbox Latch - Codes to Early Model GM Key Item # BL692918. However it is only listed up to 2006. Although the Chevy key matched the picture on your site, I am unsure if this is the correct BOLT lock set. Thanks Mike

asked by: Mike J

0

Expert Reply:

The Replacement Lock Cylinder for BOLT Toolbox Latch part # BL692915 is what you are looking for as it fits a 2007-2013 Chevy Silverado.

expert reply by: Conner L

0

Answer 1

I can help you find the right replacement lock cylinder for your 2007 Chevy Avalanche LT Toolbox. If your current lock cylinder can be removed from your Avalanche's toolbox then you will need the Late Model GM Key Cylinder from BOLT #BL692915.…

view full answer...

Answer 2

The part #BL7023480 is a blank lock core and wouldn't be keyed to anything until you use your key in it. If you bought several and all used the same key to code them they all would be keyed the same.

view full answer...

Answer 3

The Bolt Lock Core part #BL7023480 is compatible with the key of a 2015 Chevy as long as it looks like the key in the picture. How this works is that when you receive the lock core it is "blank". You will put your key in the core and turn…

view full answer...

Answer 4

I spoke with my contact at Bulldog Winch and he was able to send me a diagram that shows how the In/Out Rocker Switch part #BDW20261 wires up.

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 7

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 8

The best modern day size replacement option we have for a 6.00-16 is a 235/80-16 which measures 30-7/8" diameter x 9-3/8" wide. For this, I recommend the Kenda Karrier ST235/80R16 Radial Trailer Tire with 16" Black Mod Wheel part…

view full answer...

Answer 9

A tow package for a vehicle is usually a frame mounted trailer hitch and trailer wiring on a vehicle like your 2002 Dodge Dakota. If you have those two things you could pretty easily assume you have the tow package. Or, you can take the VIN of your…

view full answer...

Answer 10

The Solera Gas Strut part #LC280343 is designed for Lippert-Solera branded awnings. That said, it should be able to be used with others but you'd need to verify the dimensions in order to ensure compatibility. The length for this strut will be…

view full answer...

Answer 11

In order to replace the Advent Analog Wall Thermostat ACTH11 you'll need the Air Distribution Box w/ Wall-Mounted Thermostat for Advent Air RV Air Conditioners part #ACRG15. This is a digital style replacement which is what you'll need since…

view full answer...

Answer 12

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Correct BOLT Lock Cylinder for Toolbox Keyed to 2008 Chevy Silverado

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching