Recommended Cover for Coleman 47204B876 Mach 8 RV Air Conditioner

Question

Question:

Which AC cover for a Coleman 47204B876 Mach 8 RV Air conditioner?

asked by: Larry. E

0

Expert Reply:

The best fit for your Coleman 47204B876 Mach 8 RV Air Conditioner would be the Adco # 290-3023 RV Air Conditioner Cover you've looked at. The cover fits AC units up to 43 inches long by 29 inches wide by 14 inches tall. You'd have a little extra room at the top, but the cover will fit snugly all the way around so the cover would work perfectly for you as long as the drawstring holding the cover in place is tight.

I've linked to a product description video featuring the cover.

expert reply by: Mike L

0

Answer 1

For the Adco cover #290-3023 would fit and work well.

view full answer...

Answer 2

On your 2005 Ford F-150 with the towing package, there will be a port under the dash that the Curt Custom Wiring Adapter, part #C51322 plugs into. I have attached a photo that has a red arrow pointing to the location on your truck. The Curt Venturer…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 5

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Recommended Cover for Coleman 47204B876 Mach 8 RV Air Conditioner

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching