Does the Curt Harness for a 2020 Subaru Forester Come with Written Instructions

Question

Question:

Does the Curt C56040 wiring harness and hitch come with written instructions? Videos are tough to follow on a phone while laying under the vehicle.

asked by: Butch

0

Expert Reply:

Yes, the Curt T-Connector Vehicle Wiring Harness part # C56040 which is a fit for a 2020 Subaru Forester will come with a set of written installation instructions which I have also attached for you below as well. Furthermore, Curt harness has really great written instructions especially when compared to other options like from Tekonsha so they are very easy to follow.

expert reply by: Conner L

0

Answer 1

The correct Class III, 2 inch trailer hitch receiver for your 2022 Subaru Forester Wilderness is from Curt, and is the following part number: - Curt Trailer Hitch Receiver #C13409 I have added a review from a customer who put the #C13409 on their…

view full answer...

Answer 2

For your 2023 Subaru Forester, I recommend the etrailer Hitch item #e83ZR. This hitch is custom fit and bolts to your Subaru with included hardware. It is a class III hitch with a 2" receiver. I have linked an installation video below and…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 8

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 11

The correct replacement for a Demco Master Cylinder 05680-C is the Replacement Master Cylinder part #5650. I spoke with Demco to confirm this for you.

view full answer...

Answer 12

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Does the Curt Harness for a 2020 Subaru Forester Come with Written Instructions

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching