Would TLF3001 Fit my 2000 Ford F-350 with the Factory Hitch

Question

Question:

I have a 2000 Ford F350 with the factory hitch, and I just wanted to know if it would fit because my hitch is curved, does that affect anything.

asked by: Wade

0

Expert Reply:

Yes the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLF3001 will work on your 2000 Ford F-350 with the factory hitch. They are designed to be very easily installed and do an excellent job of keeping your camper secure.

The rear most portion of the hitch where you say it is rounded in slightly may pose a slight interference issue but if it does just bend or tap it out just enough for the tie downs to slide in.

expert reply by: Randy B

0

Answer 1

Thank you for providing a photo of your hitch cross tube's open ends. Yes, this is where the TorkLift Camper Tie-Down #TLF3001 will install. The linked installation instructions show the process with clear color photos to detail the install…

view full answer...

Answer 2

In order to add a set of front and rear frame mounted camper tie downs to your 2016 Ford F-250, I would need to know the bed size, running board/bed step option, and trailer hitch type. For the front of your truck you will want to use the TorkLift…

view full answer...

Answer 3

For your 2000 Ford F-350 Dually 8ft bed - with board or step underneath truck bed and with a factory installed hitch the correct fitting camper tie-downs are the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF4006 and the TorkLift Custom…

view full answer...

Answer 4

The 2-1/2 inch opening is not going to be a problem. The rear tie downs, #TLF3001, come with a sleeve that fits around the outer tube and inside of the open ends of the hitch on the truck. With the sleeve on the width of the outer tube becomes 2-1/2…

view full answer...

Answer 5

For 1/2 inch bolt leaders you would want the part #80101-1. I'd order several as they are pretty easy to destroy!

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 12

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Would TLF3001 Fit my 2000 Ford F-350 with the Factory Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching