Will Dexter 9K - 10K Hub and Drum Fit Lippert 10K Axle
Question:
do these also work for lippert 10 k axles ?? electric brakes
asked by: James
Expert Reply:
Hub and drum assemblies, like the Dexter # 8-430-5UC3 you referenced, are universal so they typically fit any 9K - 10K axle just fine. With that being said, there are some exceptions out there so you just need to confirm that your axle uses a # 387A inner bearing, a # 25580 outer bearing, and that the inner diameter of your grease seal is 2.875" to ensure that this fits.
Pull your current hub and check the numbers on your bearings to confirm this. If you can't find the numbers then Lippert should be able to confirm this on their end (if you can get me a picture of the axle tag), and as a last resort you can use a digital caliper to measure where your bearings and seal sits on your spindle. . I have attached a photo to assist you in this.
This hub and drum assembly can be used for either electric or hydraulic brakes so you're good on that side of things, but it is worth noting that this is an oil bath application so if you currently have grease for your hub/drum that will need to be thoroughly cleaned off of the spindle and you'll need to use bearing oil like part # XLPROLUBE instead.
![Jon G](https://images.etrailer.com/static/images/catg/people/1086_tn.jpg)
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - 387A
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 2.250 Inch I.D.
- Bearing 387A
- Race 382A
- 10000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Kodiak Synthetic Bearing Oil for Oil Bath Hubs - 8 oz Bottle
- Lubricants Sealants Adhesives
- Oil
- Bearing Oil
- 8 oz
- Kodiak
more information >
Product Page this Question was Asked From
Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Oil Bath
- 387A
- 25580
- For 9000 lbs Axles
- For 10000 lbs Axles
- 8 on 6-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: 205 x 8 10 tire
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Search Results: demco ez latch
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt Brake Control Harness
- Shop: Suspension Enhancement
- Search Results: weight distribution hitch
- Search Results: clevis hitch
- Shop: Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers
- Search Results: equalizer spring bars
- Search Results: springs
- Shop: Dexter Oil Hub for 9K to 10K General Duty Axles - After April 2013 - Qty 1
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/4" Lift - 2,000 lbs
- Search Results: bulletproof hitches
- Q&A: Can I Use Dexter Components on Lippert Axles and Vice Versa?
- Video: Choosing the Right Brake Controller
- Video: Review of Kodiak Replacement Sleeve For Caliper Mounting Guide Bolt - K225SS
- Q&A: Compatibility of Dexter Drum Hub on Lippert Axle of 2017 Jayco North Point 5th Wheel
- Q&A: What Is the Proper Oil for Oil Bath Hubs on Trailer Axles?
- Video: Trailer Wiring Harness Installation - 2017 Chevrolet Express Van
- Q&A: What Is The Correct Oil To Use In My Dexter Axles With Oil Lube Bath Hubs?
- Q&A: What Synthetic Oil Should I Use for Oil Bath Hubs?
- Q&A: What Type of Oil Should Be Used for Oil Bath Hubs On a Trailer Axle
- Video: Kodiak Synthetic Bearing Oil for Oil Bath Hubs Review
- Video: Review of Dexter Trailer Leaf Spring Suspension - Hangers - Suspension Kits - HAP-105-00
- Q&A: Are there Specific Marine Grade 12-1/4 Inch Electric Brakes for a Boat Trailer?