Troubleshooting B and W Companion Hitch Not Fitting into Turnoverball Gooseneck
Question:
I recently purchased a bandw gooseneck hitch through etrailer part #BWGNRK1116. I already own a bandw companion fifth wheel hitch part #BWRVK3500. I’m currently having issues with the pin sliding through the socket post. I have tried to adjust the internal slide but the pin is hitting the outer socket post. I have adjusted the rubber pads underneath but I cannot get anymore adjustments.
asked by: Jordan
Expert Reply:
I sent this to B and W and they were able to give some perspective. Here is what they sent:
It sounds as if the customer may have one of the original RVK3500 hitches. Over time we have made a slight alteration to the draw down post. The change is an elongated hole where the pin goes through. I would recommend they elongate their hole on the draw down post if they the pin isn’t wanting to go through and is off by a little bit. If this doesn’t work please feel free to let me know.
Products Referenced in This Question
B&W Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit - 30,000 lbs
- Gooseneck Hitch
- Below the Bed
- Manual Ball Removal
- 7500 lbs TW
- 30000 lbs GTW
- Removable Ball - Stores in Hitch
- Wheel Well Release
- 2-5/16 Hitch Ball
- B and W
more information >
Product Page this Question was Asked From
B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs
- Gooseneck and Fifth Wheel Adapters
- Adapts Truck
- Gooseneck Hitch to Fifth Wheel Trailer
- No Offset
- 20000 lbs GTW
- Connects to Gooseneck Hole
- Fixed Height
- Hitch Adapters
- B and W
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Location of the 40-Amp Fuse for the 2006 Chevrolet Silverado Tow Package
- Q&A: Fuse Location for Trailer Brake Controller on a 2005 Chevy Silverado
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: How to Power Trailer Dome Light When Not Connected to Tow Vehicle
- Q&A: Options for Adding Interior Lighting to Enclosed Cargo Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Mounting Hole Dimensions of Buyers Products 45 Ton Pintle Hook
- Q&A: Why Does Ground Wire of Brake Controller Need to Run to Battery when 7-Way Grounds
- Article: Adapters for Towing a 5th Wheel Trailer with a Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Q&A: What is the Difference Between 7-Way RV and Utility Trailer Connectors
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Ram Trailer Tow Prep Package