Replacement 5mm Security Key For Rhino Rack Roof Rack

Question

Question:

Is it possible to get the install tools for this system

asked by: David

0

Expert Reply:

The only tools needed are a 5mm security Allen key and a utility knife. The security Allen key is included with the # Y02-480-NT rack system but if you've misplaced yours one is available as part # SECKEY-S.

expert reply by: Mike L

0

Answer 1

If you do not have the key and can no longer unlock the lock cylinder on the Rhino Rack 2500 Series Legs #RRRLKVA, then you will want to drill out the center of the locks just enough to remove them. You can then install a new set of locks Rhino-Rack…

view full answer...

Answer 2

I do have an option for you but the rubber strips installed into the top crossbar channel on select roof racks are specific to the crossbar. Therefore, in order for us to help you get the correct replacements we'd need to know exactly which ones…

view full answer...

Answer 3

There isn't anything for your top mount Kwik Rail; Yakima has some side mounted ones that are similar but not on top, so there isn't anything compatible. If you want to add a roof rack to your 2012 Ford F-150 you can (so long as it is a…

view full answer...

Answer 4

We have just what you need. For a rack system that will attach to the camper shell you have installed on your 2002 Toyota Tacoma the TraRac CapRac part #TH29200XT is a confirmed fit and would work well. This is a fixed rack that attaches directly to…

view full answer...

Answer 5

There is a roof rack that will fit your 2016 Fiat 500X that has the panoramic sunroof, the Inno Aero. This rack is made up of Aero Crossbars #INXB100-108, Flush Feet for Aero Crossbars #INXS200, and Custom Fit Kit #INK482. This rack has a 100 lbs…

view full answer...

Answer 6

I would be happy to help you. To attach the BaseLine Towers for Yakima Crossbars item #Y00146 to your 2022 Ford F-150 naked roof you will need the following parts: HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty…

view full answer...

Answer 7

You won't see too much information on how tight to make a bar style friction sway control unit because it will be different for every situation. You would make it about as tight as you think it needs to be and then tow the trailer to see if it…

view full answer...

Answer 8

When going out on the road to test the Reese Friction Sway Control Kit #83660 after installation, you will just be looking for any issues with sway, specifically when passing larger trucks or during wind gusts. There's not any one thing that you…

view full answer...

Answer 9

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 10

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 11

For the LCI52-SB-86.5-68.5, the two ending measurements are: 1st - measurement from hub to hub, meaning the length of the axle in this case is 86.5 inches. 2nd - spring seat dimension where they're welded, meaning the spring seats are 68.5 inches…

view full answer...

Answer 12

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Replacement 5mm Security Key For Rhino Rack Roof Rack

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching