Budget Fork Mounted Bike Rack for 12 mm Thru Axle Bike

Question

Question:

Im looking to spend under 200$ on a roof fork bike mount . I have a2017 outback. My fork on the bike has a thru axle. 12x100mm. Can you help me find something in my budget that is reliable and fairly easy to use.

asked by: John P

1

Helpful Expert Reply:

The RockyMounts SwitchHitter LS Roof Bike Rack # RKY1270 fits what you are looking for. It's easy to use, works with your axle size/style, a fork mount, and fits your budget.

This also fits the factory bars of your 2017 Subaru Outback Wagon as well.

expert reply by: Jameson C

1

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

The Rhino Rack SwitchHitter part #RKY1270 does come with T-slot adapters and would fit into the channel of the Rhino-Rack Vortex Aero Crossbars #RRVA137B-2 that you referenced.

view full answer...

Answer 3

For an excellent rack that will work with your carbon racing bike I recommend the fork mount rack #RBC035. This is one of the most stable racks since it has 2 straps at the front to secure the rack to the roof rack. This creates a stable ride for the…

view full answer...

Answer 4

The Swagman Fork Down Roof Mounted Bike Carrier - Fork Mount #S64710 requires that your fork have a 9mm quick-release front wheel skewer. For your Fox Factory Fork with 15QR style thru axle, I recommend the RockyMounts SwitchHitter Roof Bike Rack -…

view full answer...

Answer 5

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 8

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 9

The Tekonsha OEM Vehicle Wiring Harness #22121 that you referenced includes all the wiring and parts necessary to install a fully functional 7-Way connector and trailer brake controller. The included brake controller harness is compatible with and…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 12

Brake systems are not dependent on the hub bolt pattern. So you can use the Electric Trailer Brake Kit #AKEBRK-7-SA for 12 inch hub/drums or #AKEBRK-35-SA for 10 inch hub/drums. Then use #10-1-1 wire sold by the foot for your brake magnet wiring.…

view full answer...

Budget Fork Mounted Bike Rack for 12 mm Thru Axle Bike

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching