Brake Controller Solution to Avoid Setting Off Error Code on 2019 Toyota Highlander Hybrid
Question:
I have a 2019 Toyota Highlander Hybrid that came with the factory prep tow package and 4-pin connector. I'm wondering if a brake controller can be installed. I've read installing a brake controller will set off an error code in the Highlander's computer so I'd like to avoid this. What do you suggest?
asked by: Tim G
Expert Reply:
While most traditional brake controllers will require you to tap into your Highlander's brake switch, potentially setting off an error code in the vehicle's computer, I do have a couple of brake controller options that would instead pull power from your trailer connector, leaving your vehicle's wiring intact.
First, you'll need to upgrade your 4-Pole connector with our 7-Way RV Upgrade Kit for Trailer Brake Controller Installation # ETBC7L. Your existing 4-Pole plugs into the back of the adapter and all you need to do from there is run your power wire directly to the vehicle's battery and attach your ground.
For a wireless brake controller, I highly recommend the Curt Echo # C51180, because it simply plugs in line with your 7-way trailer connector. There's no drilling, mounting, or splicing required. It uses your Bluetooth enabled smartphone or tablet as a monitor and remote control. Because of how portable it is, the Echo can't be locked down in any way, which could be a drawback for people worried about theft since it would require plugging and unplugging the unit every time.
If you prefer the convenience of a one time installation, without sacrificing wireless connectivity in order to avoid setting off any codes on the Highlander, then the Autowbrake # 3430001 is the way to go since it permanently mounts on the trailer instead and once its installed, it can be used with any tow vehicle. It also comes with its own wireless remote, which means you're not tying up your phone when towing.
Both options offer proportional braking which automatically adjusts trailer's braking based on deceleration of tow vehicle as well as a manual override option for immediate braking in case of an emergency. I've attached links to installation videos on both controllers as well as the wiring upgrade kit mentioned above for you to check out.
Products Referenced in This Question
Autowbrake Electric Brake Controller - Trailer Mount w/ Remote Fob - 1 to 3 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Remote Control
- Trailer Mount
- Up to 3 Axles
- Up to 360 Degrees
- Autowbrake
more information >
Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: Curt Echo Full Review
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Replacement LED Top Command Clearance Light With SAE-AP2-16 On Lens For 2018 Sunseeker Motorhome
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?