Replacement Remote for Reese Towpower 2K Electric Winch

Question

Question:

I need to replace , remote control unit , for a reese towpower winch product no. 7033600

asked by: Paul H

0

Expert Reply:

I reached out to my contact at Reese and they were able to confirm that a replacement handheld remote isn't available for your Reese Towpower 2,000 lb electric winch, model 7033600.

Economy winches like these aren't designed to be serviceable, so replacement parts aren't offered. This means that you will only be able to use the standard hand crank to operate it going forward.

The Bulldog Winch Trailer Winch # BDW15017 would be a nice upgrade to your 2K Towpower winch. It features a 1.5-horsepower motor with 3,400 lbs of line pull. This winch does come with a water resistant hand held remote, also available as a replacement through part # BDW20220. A wireless remote kit # BDW20212 that lets you operate the winch from up to 100 feet away is also available. The permanent magnet motor offers great line-pulling power and speed but it's lighter and uses less current than the series-wound motor on your current winch.

I've attached a video link at the bottom of the page for you to check out.

expert reply by: Carla M

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 4

So I have your hub narrowed down to a few different possibilities but we need to know what your bolt pattern is to know for sure. We have the part #84556UC3 for if your bolt pattern is 5 on 5 inch. We have the part #845476UC3 for if your bolt pattern…

view full answer...

Answer 5

In order to get your steps back up and running you are going to need to install the update kit, the Motor Upgrade Kit for Kwikee 26 Series Electric RV Steps part #LC379801. The update kit is your only option because they no longer offer a replacement…

view full answer...

Answer 6

Thank you for the pictures- they're always helpful! I have a solution for you, but the Lippert gear box you were looking at is a replacement for the newer Kwikee 32 Series Steps. I spoke with my contact at Lippert and they said that the gearbox…

view full answer...

Answer 7

We've checked with the manufacturer of the electric step 151320 that you mentioned before and since the step is no longer made the replacement parts are not available. There wouldn't be an easy way to source the pin you are looking for.…

view full answer...

Answer 8

Yes it is that simple! To wire in a brake controller to your 2011 Chevy Colorado only requires you to wire the four wires of the controller to the 4 wires that are present under the dash of your truck. I attached an install video that shows this…

view full answer...

Answer 9

The difference is the style of connector that is on each of the wires. The part #BDW20178C uses a small loop ring terminal, the part #BDW20178A uses a medium size ring terminal and the part #BDW20178D uses spade connectors.

view full answer...

Replacement Remote for Reese Towpower 2K Electric Winch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching