Correct Trailer Wiring Harness for 2019 Chrysler Pacifica
Question:
Months ago I bought the Curt 56322 based on your recommendation. The connectors will not mate. The 2 little ears on the female connectors are set differently. My stop/turn lights are not LEDs. Does that make a difference? My connectors are light blue/gray, not black, if that helps. I can send a picture. Do you have a harness for my car?
asked by: John G
Expert Reply:
Judging by the photo you've provided (thanks for the photo), you'll likely need the # C56399. Per fit information provided by Curt, the # C56399 which has the gray connectors is supposed to be a fit for the LX and the Touring models. I've provided a close-up shot of the connectors on the # C56399, when visually compared to what's shown in your photo it looks like a match.
The folks at Curt tell me that if you could provide me with your VIN, They can look up your vehicle and determine which is the correct T-Connector for your vehicle.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Replacement Hub Needed for Lippert 122093 Hub on 5,200 lbs Axle
- Q&A: Will the Draw-Tite Trailer Hitch Fit a 2022 Volvo XC90 Recharge
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: How to Replace or Install an RV Roof Vent
- Q&A: Can Electric Trailer Brake Kit # AKEBRK-2 be Submerged in Water
- Q&A: Brake Controller and 7-Way Install on 2013 Chevy Express w/ Tow Pakage
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: Hub and Drum Assembly with 8 on 6-1/2 Bolt Pattern for Dexter 10,000 Pound Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Surge Brake Actuator To Replace Tie Down Model 125 12,500LB Drop Actuator
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Measure for Trailer Hitch Drop
- Article: Brake Controller Installation: Starting from Scratch