How to Measure a Trailer Hub for the Correct Size Grease Cap for a 1993 Coleman Pop-up Camper
Question:
I have a 1993 coleman popup with a 5 0n 4 1/2 hub how do I determine the grease cap size. Bought 2 from some one else they seamed to fit but on first trip they came off.
asked by: William W
Expert Reply:
You would need to measure the inside diameter of the hub opening to determine which cap size is needed. You would want to choose a cap whose outside diameter matches the inside diameter of the hub.
Some of the most common sizes are 1.980 inch, 1.986 inch, 2.441 inch and 2.717 inch. As you can see the sizes can differ by very small amounts. To measure accurately to two or three decimal places, I'd recommend using a digital caliper like part # PTW80157 so that you can be confident you are getting the correct size for your hub. I have included a link to our grease cap main page for you.
Products Referenced in This Question
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Grease Cap, 1.988" OD Drive In - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Standard Grease Cap
- 1.98 Inch O.D.
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: How to Measure a Trailer Hub for the Correct Size Grease Cap
- Article: Trailer Tire Sizing
- Article: Most Popular Wheel Bearings
- Shop: 2-Leaf Slipper Spring w/ Radius End for 1,000-lb Trailer Axles - 24-5/8" Long
- Shop: DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug - 2.45" Outer Diameter
- Shop: Spring-Eye Bolt with Locknut for Slipper Springs - 3-1/2" Long
- Search Results: grease cap
- Shop: Bearing Kit, L44649 Inner/Outer Bearings, 10-9 Seal
- Shop: 2-1/2" Lubed Dust Cap and Rubber Plug - 2.45" x 1.52" x 1.18" - Qty 1
- Search Results: trailer lights
- Video: Review of etrailer 2 Leaf Slipper Spring - e36SR
- Q&A: Replacement Grease Cap Plug for a Tracker Boat Trailer
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap Plug for E-Z Lube Grease Caps - Qty 2
- Search Results: trailer roller
- Search Results: dexter axle grease seals
- Search Results: spindle nut retainer
- Search Results: dexter axle grease caps
- Search Results: dexter axle seals
- Video: TruRyde E-Z Lube Grease Caps Plug Review
- Q&A: Replacement Grease Cap Plugs For Super Lube Axles On a 2003 Trailstar Boat Trailer
- Q&A: Standard Grease/Dust Caps Won't Fit Hubs on Trailstar Boat Trailer
- Q&A: Replacement Hub for Tracker TrailStar Boat Trailer
- Video: Dexter Nev-R-Adjust Electric Trailer Brake Kit Installation
- Shop: Trailer Hitch
- Q&A: Grease Cap for Trailer Hub that Has Bore of 2.245 inches
- Video: Review of Trailer Leaf Spring Suspension - Spring Mounting Hardware - 166079
- Video: TruRyde Trailer Bearings Races Seals Caps - Caps - DC200L-DCRP Review
- Video: Review of DeeMaxx Trailer Bearings Races Seals Caps - Stainless Steel Grease Cap with Plug - DE79YR
Jeff Z.
5/17/2020
I am definitely looking for a 1 inch 5/8 wheel bearing cap for a boat trailer that someone put together it looks like odd parts. I need two of them. Please advise.