Running Boards and Light Kit For 2012 Toyota 4Runner Limited

Question

Question:

My 4Runner has a special molded panel under the doors of the vehicle. I do not want to have to remove that panel. Is there longer brackets that hang below and a flat running board can be installed? Running boards toyota 4Runner Limited

asked by: Javier L

1

Helpful Expert Reply:

The molded panel on the 2012 Toyota 4Runner is standard with the trim package of the Limited 4Runner. The boards available that fit the Limited will fit below that panel in your photos.

I recommend to use the Westin Sure-Grip Running Boards w/ Custom Installation Kit part # 27-6120-1945 which fits the 2012 Toyota 4Runner Limited and has a wide 6" step for extra traction. They are also brushed aluminum for rust Resistance and they look nice.

You can also add the Westin LED Light Kit for Sure-Grip Running Boards part # 27-6000 so you can see them at night.

expert reply by: Heather A

1

click to enlarge

Answer 1

I have a replacement option for you, but the Westin Custom Installation Kit #27-1945 is designed for the Westin Molded, Sure-Grip, and Grate Step Running Boards and will not work with the OEM steps on your 2020 Toyota 4Runner. Instead I recommend…

view full answer...

Answer 2

Yes, the Westin Sure-Grip Running Boards w/ Custom Installation Kit #27-6120-1945 comes with all mounting brackets needed to install on your 2019 Toyota 4Runner. All you need other than this kit is the basic hand tools for the install which include…

view full answer...

Answer 3

The Westin Gap Strip for Westin Sure-Grip Running Boards, part #27-9907, is a pair of gap strips that fill the space between your running boards and the vehicle. These have a J-shaped cross section and measure as follows: overall length is 84-1/2…

view full answer...

Answer 4

Yes, we do have a set of air bags that will fit your 2024 Chevy Silverado 2500 that are also compatible with an in bed hitch. They are the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs capacity that will level…

view full answer...

Answer 5

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 6

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 7

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 8

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 9

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 10

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 11

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 12

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Running Boards and Light Kit For 2012 Toyota 4Runner Limited

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching