Replacement Hub Assembly for Timbren Axle-Less Suspension System # A20RS545
Question:
Can I buy a replacement hub assembly for this suspension 2,000 lb Timbren axle less trailer suspension with 5 on 4 1/2inch bolt pattern, including bearings, races and seals? Also, do you sell bearings, races and seals separately?
asked by: Jeremy S
Expert Reply:
To replace the hub assemblies on the Timbren Axle-Less Trailer Suspension System # A20RS545 the Dexter Trailer Idler Hub # 8-258-5UC1-EZ will work perfectly. This 2,000 pound hub includes all the bearings, races, and seal and it's completely compatible with the spindles on the Timbren Axle-Less System.
We do also have the bearings, races, and seals used on these hubs available separately. For the inner and outer bearings you would need part # L44649 and for the inner/outer races you will use part # L44610. Then for the grease seal you will use # 10-9.
I have attached a couple short video reviews below that you can also check out.
Products Referenced in This Question
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.500 Inch I.D.
- 1.987 Inch O.D
- TruRyde
more information >
Dexter Trailer Idler Hub Assembly - 2,000-lb and 2,200-lb E-Z Lube Axles - Pre-Greased - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- EZ Lube
- L44649
- L44649
- For 2200 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Race for L44643 and L44649 Bearings
- Trailer Bearings Races Seals Caps
- Races
- Standard Races
- 1.980 Inch O.D.
- Bearing L44643
- Bearing L44649
- Race L44610
- 2000 lbs Axle
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension w/ Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 2K
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- Idler Hubs
- 2000 lbs
- 5 on 4-1/2 Inch
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Continue Researching
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Wiring Diagrams
- Article: Trailer Tire Sizing
- Q&A: Difference Between Trailer Tire Sizes ST205/75R15 and ST225/75R15
- Q&A: How to Replace a 4-Way Trailer Connector with 8 Wires
- Q&A: Replacement For Fulton Drop-Leg Stabilizer Jack
- Article: Most Popular Wheel Bearings
- Article: Where to Position the Trailer Axle?
- Q&A: Adding Crossbars To A Teardrop Trailer
- Q&A: Replacement for Al-Ko B850-3 Trailer Axle Needed
- Article: Trailer Lighting Requirements
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)