Can Tekonsha Prodigy P3 Brake Controller be Installed on 2019 Ford F-750 Super Duty
Question:
will the tekonsha prodigy p3 work with the ford f750 and wiring digram if available??
asked by: Randy R
Helpful Expert Reply:
You should be able to install the Tekonsha Prodigy P3 # 90195 on your 2019 Ford F-750 Super Duty by splicing into existing wires under your driver-side dash, but you'll need to use a circuit tester like part # PTW2979 to do so as I haven't been able to find a wiring diagram to show what wires are for what function. Below is a list of the wiring connections that need to be made with the pigtail that comes with the P3:
Black - 12V Power
Blue - Brake Controller Pin on 7-Way
White - Ground
Red - COLD Side of the Stop Light Switch (only gets hot when brake pedal is pressed
If you don't already have a 7-Way connector that matches up with a standard trailer then you also need to install a 4-Way # 18252 along with the Universal Wiring Kit # ETBC7 so that you can activate the lights on your trailer as well as the electric trailer brakes.
I have attached some articles for you to check out that can help you accomplish all of this.
Products Referenced in This Question
4-Way Flat Trailer Connector w/ 72" Harness, Circuit Tester and Wire Taps
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- 6 Feet Long
- Universal Fit
- 4 Flat
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LCD Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Article: How to Choose the Right Trailer Hitch Class
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Q&A: How Do I Measure the Drop Distance on a Trailer Drop Axle?
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Q&A: Recommended Dexter Suspension Kit 7753400