How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35

Question

Question:

I own a 2010 FX35 and I am very interested in buying this product for my towing need. Before I do so, I would like to understand how visiable is this hitch when you install onto a FX35, is it invisiable or you can pretty much sees the hold thing hanging from the bottom when you look from the back of the vechile, thanks for you help.

asked by: Steven Z

0

Expert Reply:

My technical contact at Curt Mfg. was kind enough to send me a photo of the Curt Class III Round Tube Receiver Hitch, # 13554, on an Infiniti FX35. I attached this photo for you to see.

The hitch in the photo is blue because it is the engineering mockup for the hitch, but it does show the final position of the hitch when correctly installed. The hitch in black will blend much better with the vehicle underbody.

None of the hitches we carry for the 2010 Infiniti FX35 will be completely invisible. I attached a link to all of the hitches available for your vehicle.

expert reply by: Robert G

0

click to enlarge

Answer 1

You should not have any issues with the ground clearance with a trailer hitch for your 2017 Infiniti QX70. When we test-fit the Curt Trailer Hitch Receiver #13554 on this same vehicle, it measured 13 inches from the top of the receiver to the ground,…

view full answer...

Answer 2

The only hub we have that is associated with a 3/4 inch spindle is #AH15450ECOMP. This is an agricultural hub that takes inner bearing #LM67048 and outer bearing #LM11949. But the spindle it fits on is not straight, it is tapered, #TRU54FR. If this…

view full answer...

Answer 3

The ground clearance is going to be the same for you 2016 Nissan Quest with both the Curt Trailer Hitch Receiver #C13078 and etrailer Trailer Hitch Receiver #e98KR. These are actually the same hitch, just with a different powder coat, which is why…

view full answer...

Answer 4

The design of the trailer hitches we offer that will fit your FX50S have a visible crossbar. We offer two hitches for your vehicle. We have photos of the installation of the Curt Trailer Hitch, part #13554 and as you can see in the attached photo,…

view full answer...

Answer 5

Thanks for the info on your bikes! I did not find any pictures of a 20" Frog 52 with a fender, but I was able to find a picture of your Giant Quick E+1 and as long as both bikes have fenders that go the same distance forward you shouldn't…

view full answer...

Answer 6

Suspension Enhancement would assist with keeping your vehicle from dropping in the rear. Unfortunately there is not currently any vehicle suspension enhancement from any of our manufacturers that is confirmed to fit your 2015 Nissan Quest.…

view full answer...

Answer 7

According to your Owner's Manual for your 2014 Nissan Quest, your vehicle is rated for a maximum tongue load of 350 lbs, so your vehicle in this case will limit the load because it is not rated as high as the hitch. I recommend the Draw-Tite…

view full answer...

Answer 8

Yes, you will likely see the issue of the malfunctioning Pre-Collision System (PCS) on your 2018 Toyota Highlander with the Tekonsha Primus IQ Trailer Brake Controller #TK90160. So you can do is the Roadmaster Single Park Light Diode #RM-690.

view full answer...

How Visible is the Curt Class III Hitch # 13354 when installed on a 2010 Infiniti FX35

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching