Measurements for Adjustable RV Trailer Hitch 13703
Question:
1What is the distance between the holes for mounting to my frame center to center 2The distance from the top of the hitch to the bottom for ground clearance 3Distamce from the back end of the frame mount to the end of the receiver tube. for how far the receiver tube will be out the back 4 I will be mounting this to a 2004 fleetwood wilderness 5th wheel camper so I can install a bike carrier. Thank You for your time & if possible I would like to order this by 6/27/09
asked by: Ralph W
Expert Reply:
I have obtained the measurements you have requested
On the mounting brackets, the holes measure 7-1/2 inches in length and 2 inches in height (center of the hole to center).
From where the bracket attaches to the frame to the top of the receiver tube, it is 6-1/8 inches. You requested a height clearance measurement; however, with this measurement, you will be able to measure your own frame and where it would clear the ground.
From the back of the receiver tube to front of the receiver, it measures 11 inches.
This is a very versatile hitch, it can be adjusted from 22 inches to 72 inches. It can give you plenty of options and has a 2 inch receiver opening. Please note, many bike racks specifically indicate they are not to be used on a 5th wheel trailer or camper. For your safety, use a Class III bike rack because of the stronger welds; it will bounce around quite a bit. There are also the options of RV and camper bike racks. I will attach some helpful links below.
Products Referenced in This Question
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Product Page this Question was Asked From
Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- RV and Camper Hitch
- Frame Mount Hitch
- 22 - 72 Inch Wide Frame
- 350 lbs TW
- 3500 lbs GTW
- 2 Inch Hitch
- Bolt-On
- Weld-On
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 22" to 72" Wide
- Shop: Stromberg Carlson Adjustable Accessory Hitch Receiver - 49-1/2" to 76-1/2" Wide - 2"
- Shop: Ultra-Fab 2" Trailer Hitch Receiver for Trailer Frames
- Shop: Trailer Hitch
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Article: Trailer Hitch Receiver Sizes
- Q&A: How Thick Is The Metal of Square Tubing On The Draw-Tite Trailer Hitch # 24677
- Search Results: hitch receiver
- Video: Curt RV and Camper Hitch - Frame Mount Hitch - 13703 Review
- Shop: Adjustable Width Trailer Hitch Receiver for RVs, 18" to 51" Wide
- Shop: Multi-Fit Motor Home Trailer Hitch, 47" - 71" wide
- Shop: Curt RV Bumper 2" Trailer Hitch Receiver
- Search Results: rear hitch for 5th wheel
- Q&A: Using a Hollywood Racks 1450E with a 5th Wheel RV
- Q&A: Is Stabilizing Strap Needed For Curt Hitch C13206 or Will Clamp be Okay
- Q&A: Will the Curt Adjustable Width Trailer Hitch 13703 Fit a 2012 Sabre Silhouette 291BHTS Trailer
- Q&A: Distance from the Motorhome I Beam to the Center of the Vertical Holes in the RV Receiver Hitch
- Video: Curt Adjustable Width RV Trailer Hitch Installation - 2017 Forest River Rockwood Mini Lite Travel Tr
- Q&A: Hitch Recommendation for 2019 Winnebago Micro Minnie Travel Trailer
- Q&A: What is the Width of the Square Tube on the Curt Hitch C13703?
- Video: Ultra-Fab Products RV and Camper Hitch - Frame Mount Hitch - UF35-946403 Review
- Search Results: uf35~946403
- Video: Curt RV Bumper Trailer Hitch Receiver Review
- Video: Curt RV and Camper Hitch - Bumper Mount - E-100 Review
- Video: Curt RV and Camper Hitch - Frame Mount Hitch - C13702 Review
- Video: Trailer Hitch Installation - Ameri-Lite Gulf Stream Trailer - Curt
- Search Results: curt 19101
- Search Results: propane tank straps
- Search Results: 18050
- Search Results: rv receiver hitch