Will the Curt Echo Brake Controller Work On the Back Of a Trailer To Tow Another Trailer
Question:
I want to tow a trailer with brakes behind my fifth wheel being towed by my 2019 GMC 3500 Duramax. The fifth wheel has a four way connector at the receiver. The towed tandem axle trailer has brakes on both axles and is equipped with a 7 way plug. Will the Curt Echo controller with a 4 pin to a 7 pin adapter work? If so do I only need a 12 volt power supply to the 7 way and how would I supply that? Instead of running a long wire from my pickup could I power it from a 12 volt battery installed on the towed trailer?
asked by: Doug A
Expert Reply:
The Curt Echo Mobile Trailer Brake Controller part # C51180 would work in a triple tow setup. However, you would need the 7-Way RV Upgrade Kit part # ETBC7L if the trailer directly behind the tow vehicle only has a 4-way connector. In order to install the 7-Way RV Upgrade Kit you will simply plug the two 4-ways into one another, ground the white wire, then run the black wire up to the trailer battery. Therefore, you could power the Curt Echo via the 7-Way RV Upgrade Kit using the trailer battery so you don't have to run a separate wire between the trailer and vehicle.
Products Referenced in This Question
7-Way RV Upgrade Kit for Trailer Brake Controller Installation - 12 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App - 1 to 2 Axle - Proportional
- Trailer Brake Controller
- Proportional Controller
- Hidden
- Up to 2 Axles
- Smartphone Display
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Replacement Trailer Grease Seals for Allis 5013 29772
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Does HBA-CAM Adapter Module for Hydrastar Electric Over Hydraulic Brake Actuators have 2 or 4 Wires
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Kit to Convert 2021 Vanleigh Pinecrest 335RLP to Electric Over Hydraulic Disc Brakes
- Article: What is Overlanding? How to Start your Overlanding Journey
- Article: Curt Echo Full Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: How To Setup a 2019 Jeep Cherokee Trailhawk for Flat-Towing
- Q&A: Troubleshooting A Clunking Noise Between A Fifth Wheel Hitch And Base Rails While Towing
- Q&A: Why Is 5th Wheel Trailer Clunking When Starting/Stopping with B&W Companion and MORryde Pin Box