Can I Install the TorkLift SuperHitch Magnum without Removing My Camper Tie Downs?

Question

Question:

The question is can I still use my rear frame mounted torklift camper tie downs that are currently mounted on the truck and will they interfere with mounting this hitch. I know this hitch comes with spots to mount some kind of camper tie down attachment but I dont need to use them,

asked by: Bob E

0

Expert Reply:

I checked with my contact over at TorkLift and he mentioned that in almost every case they have encountered, the TorkLift SuperHitch Magnum # TLC1208-30 will occupy the space that your current camper tie downs are mounted so the camper tie downs would interfere with installation. In order to install the SuperHitch Magnum you will need to remove your camper tie downs and attach them to the dedicated mounting spots on the SuperHitch.

expert reply by: Erik B

0

Answer 1

For the front tie-down, you'd use the Torklift #TLD2140. The rear tie-down will depend on whether you have the factory hitch or a TorkLift Super Magnum hitch installed. If you have the factory hitch, use #TLD3113 for the rear, or if you have the…

view full answer...

Answer 2

The factory dual exhaust pipes on the passenger's side of your 2014 Ford F-350 will not interfere with the installation of the TorkLift Custom Frame-Mounted Rear Camper Tie-Downs, part #TLF3006. I confirmed with Torklift that these are a fit for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 5

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 6

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 7

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 11

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 12

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Can I Install the TorkLift SuperHitch Magnum without Removing My Camper Tie Downs?

Product Page this Question was Asked From

Continue Researching